***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 12:27 pm


Board index » Kit Building 101 at the OLF!

All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
SkyHigh
 Post subject: Carbide and oil
PostPosted: Sat Mar 07, 2009 10:26 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329
Hi!

I notice some burnishers are made of H.S.Steel(Crown) and some like Blue Spruce states that it's made of carbide. Can someone share the difference?

Also, what oil do you use to burnish scraper so that it rolls easy?

Thanks, David
Top
 Profile  
 
windsurfer
 Post subject: Re: Carbide and oil
PostPosted: Sat Mar 07, 2009 5:56 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Feb 02, 2008 12:15 pm
Posts: 474
Location: Santa Barbara, Ca
First name: John "jd"
City: Santa Barbara
State: Ca
Focus: Build
Status: Semi-pro
There is no significant difference other than the carbide will be harder to nick. either will work fine. An old screwdriver with no nicks in the shaft will also work fine.

I use either 3in1 oil or olive oil, whatever is sitting next to my workbench when burnishing scrapers. there is no magic, you just want the burnisher to slide smoothly and not tear the edge.

-jd
Top
 Profile  
 
WaddyThomson
 Post subject: Re: Carbide and oil
PostPosted: Sun Mar 08, 2009 9:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Just make sure to wipe the oil off after you are done.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
windsurfer
 Post subject: Re: Carbide and oil
PostPosted: Sun Mar 08, 2009 12:42 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Feb 02, 2008 12:15 pm
Posts: 474
Location: Santa Barbara, Ca
First name: John "jd"
City: Santa Barbara
State: Ca
Focus: Build
Status: Semi-pro
...and be careful not to cut your finger on the fresh edge while wiping off the oil.

(I figure if I type that out, maybe I will finally learn that lesson)

-jd
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » Kit Building 101 at the OLF!

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com