Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Building Filippo's Myka Neck Jig
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10117&t=38345		 Page 1 of 1
Author:  Rienk [ Wed Jan 02, 2013 2:46 am ]
Post subject:  Re: Building Filippo's Myka Neck Jig
Chris, I'm not familiar with this tool... where can I find a link for it's use?

If I end up building one, I might be able to do a second set, if you'll pick up the shipping (no promise as to when I can get to it).

Thanks!
Author:  CrookedTree [ Sun Jan 20, 2013 11:01 am ]
Post subject:  Re: Building Filippo's Myka Neck Jig
Well I used Chris' Rhino plans to make my own version of this. Built from mainly red oak and basswood and with the end walls built at 4" to accommodate thicker bodies if needed. This doesn't do justice to Filippo's gorgeous version, but for a jig it is functional.

Without further delay, here are the photos:

Image

Image

Image

Image

Image

Image

Image
Author:  Marzano San [ Wed Nov 20, 2013 2:50 am ]
Post subject:  Re: Building Filippo's Myka Neck Jig
Many thanks for posting this jig! I'm building one.
Respect!
Author:  Rienk [ Wed Nov 20, 2013 9:23 am ]
Post subject:  Re: Building Filippo's Myka Neck Jig
verhoevenc wrote:
I also have ~8 of these built and for sale now-a-days too.
Chris


Yeah, I'm glad someone finally built some (10 months later :)
What did you end up doing for clamps?
Do you have pictures to post?
Author:  Rienk [ Wed Nov 20, 2013 4:23 pm ]
Post subject:  Re: Building Filippo's Myka Neck Jig
verhoevenc wrote:
I've had them done for MONTHS. Even sold a couple on here. Check the classifieds section for answers to all your questions. Also check the video tuts section for the video I made on using this (as well as other methods).
Chris


I figured as much - I just only have this thread to notify me about this particular topic/product.
Glad you did them!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/