| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Radius Offsets & Scale Length Calculator spreedsheets from http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10117&t=36555 |
Page 1 of 1 |
| Author: | LanceK [ Mon May 21, 2012 12:50 pm ] |
| Post subject: | Radius Offsets & Scale Length Calculator spreedsheets from |
Shane at High Mountain Tonewoods. Shane created these files and sent them to me a while ago and asked if I could host them. I have uploaded them to my guitar site. You should be able to right click and "save as" After you down load, rename your files and add .xlsx as the extension. Big thanks to Shane! http://www.kragenbrinkguitars.com/olffiles/RadiusOffsets http://www.kragenbrinkguitars.com/olffiles/ScaleLengthCalculator |
|
| Author: | Steve_E [ Mon May 21, 2012 5:12 pm ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets from |
Lance, are these spreadsheets (per the topic)? I tried to open/save them as excel files, but they don't want to open. Steve |
|
| Author: | Robbie_McD [ Mon May 21, 2012 6:12 pm ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets from |
Just add an .xls extension to the downloaded file and open in Excel. |
|
| Author: | NWflyonly [ Thu Jun 07, 2012 10:53 pm ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets from |
I added the .xls and they opened with jiburish? |
|
| Author: | Shane Neifer [ Tue Sep 11, 2012 12:50 am ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets from |
To open just right click the files and select "open with excel" They will work fine then (They did for me anyways). I built these files for my cnc work but they are great for those of you that want to hand saw fret boards and to check to see if your radius dish is right. If you have any questions about the files just let me know. Thanks Shane |
|
| Author: | Heinjus guitars [ Mon Nov 18, 2013 3:08 am ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets fr |
Hi shane, don't suppose you would have a cnc code written up for radius dishes you would like to share? I have a guy who will machine some dishes for me but unfortunately when it comes to writing the necessary program i just dont have the skills to pay the bills. Radius dishes are ridiculously overpriced to purchase here in australia and too big and costly to import. |
|
| Author: | Heinjus guitars [ Sat Nov 23, 2013 9:25 pm ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets fr |
Anyone??? |
|
| Author: | Ruby50 [ Sun Feb 23, 2014 9:19 am ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets fr |
If you have an offset and a baseline length, here is an easy method to draw the arc. You can use the arc to make a jig for routing out a radius dish, you can use it to make the little piles of index card at different locations to simulate it, or you n=can make a radius batten with it. http://www.flickr.com/photos/ruby1638/s ... 172644427/ |
|
| Author: | aqualibguitars [ Fri Mar 21, 2014 12:50 pm ] |
| Post subject: | Re: Radius Offsets & Scale Length Calculator spreedsheets fr |
yes i opened in office 2007 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|