| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Drum Sander FTW http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10117&t=31703 |
Page 1 of 1 |
| Author: | calgarc [ Fri Apr 01, 2011 1:48 pm ] |
| Post subject: | Drum Sander FTW |
i was on the silverfishlongboarding forums and came across a very interesting idea. they guy was thinking of taking his broken blender and turning it into a drum sander. just something crude and simple. here is a link to the original post http://www.silverfishlongboarding.com/f ... 1298682042 thinking of building one, if i find a blender at a garage sale this summer 
|
|
| Author: | Ti-Roux [ Sat Apr 02, 2011 12:43 am ] |
| Post subject: | Re: Drum Sander FTW |
Genius. |
|
| Author: | Mike Dotson [ Sat Apr 02, 2011 6:19 pm ] |
| Post subject: | Re: Drum Sander FTW |
Even at it's slowest speed I think a blender would be about 5X too fast, have no torque and probably nowhere near a durable enough bearing. A buddy bought one of those Home Depot ROSS sanders the other day off Craigslist for $50. |
|
| Author: | runamuck [ Sat Apr 16, 2011 2:09 pm ] |
| Post subject: | Re: Drum Sander FTW |
calgarc wrote: ... a very interesting idea. they guy was thinking of taking his broken blender and turning it into a drum sander. just something crude and simple. Must be quite a blender! I've never seen a blender that is powerful enough and I'll bet you haven't either. Plus they're way, way, way too fast. What's the word for the opposite of 'genius'? |
|
| Author: | Ti-Roux [ Mon Apr 18, 2011 9:31 am ] |
| Post subject: | Re: Drum Sander FTW |
runamuck wrote: What's the word for the opposite of 'genius'? Suineg |
|
| Author: | L. Presnall [ Mon Apr 18, 2011 10:51 am ] |
| Post subject: | Re: Drum Sander FTW |
Ti-Roux wrote: runamuck wrote: What's the word for the opposite of 'genius'? Suineg Just wait til he tries to sand some bridge wings and ends up with a margarita instead! 
|
|
| Author: | Ti-Roux [ Mon Apr 18, 2011 2:44 pm ] |
| Post subject: | Re: Drum Sander FTW |
 Oh god, EIR margaritas...
|
|
| Author: | calgarc [ Tue Apr 19, 2011 8:54 pm ] |
| Post subject: | Re: Drum Sander FTW |
well it was for skateboard building. but still might work out for doing some rough sanding of a guit body |
|
| Author: | Ti-Roux [ Tue Apr 19, 2011 9:10 pm ] |
| Post subject: | Re: Drum Sander FTW |
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|