Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Epoxy Pore Filling: Part 3 on YouTube
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10117&t=24526		 Page 1 of 1
Author:  Fred Tellier [ Tue Nov 10, 2009 11:55 am ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Thanks Todd, great video series.

Fred
Author:  Dave Fifield [ Wed Nov 11, 2009 1:12 am ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Excellent, thanks Todd! I have a few questions for you:

1. Do you dilute the 3rd coat of epoxy pore filler with DNA at all?
2. Once you have keyed the 3rd coat ready for vinyl sealer, do you shoot the whole guitar with it?
3. What finish do you put over the vinyl sealer, nitro?

Perhaps you'd consider continuing the video series to show us how you go on from video #3?
I for one would really appreciate it!! [:Y:]

Thanks,
Dave F.
Author:  jlneng [ Thu Nov 12, 2009 6:34 pm ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Todd Stock wrote:
Part Three now posted on YouTube.


Before I watched your video, I was using a credit card instead of a squeegee to fair out the zpoxy and was not getting good results meaning too much sanding between coats. I bought a squeegee today and pore filled a flamenco negra I am building. A BIG difference! I also switched to wiping with Naptha in lieu of DA. Thanks so much for taking the time to make these videos. They are a big help to saw dusters like me.
Author:  jlneng [ Fri Nov 13, 2009 8:46 am ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Todd Stock wrote:
Glad it was helpful...hope we'll see pics of the guitar here soon.

You will, I will be spraying it this weekend
Author:  Gregg C [ Sun Dec 27, 2009 10:39 am ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Excellent video series !!
Thank you !!

I really like that guitar holder, "guitar trojie"
Did you make it ??
Or can thay be purchased ??
Gregg
Author:  Chris Paulick [ Sun Dec 27, 2009 5:56 pm ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Thanks for the vids Todd! I'm just getting around to watching them a bit late. I been catching up on some reading and tuts and non active stuff since my back went out 3 days ago. This was entertaining, I'll have to give it a go on the Claro. :)
Author:  Gregg C [ Sun Jan 03, 2010 2:44 pm ]
Post subject:  Re: Epoxy Pore Filling: Part 3 on YouTube
Thanks Todd, I'm on it !!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/