| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Martin Fretboard and bridge files http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10106&t=54868 |
Page 1 of 1 |
| Author: | AlanC [ Tue Mar 29, 2022 12:49 pm ] |
| Post subject: | Martin Fretboard and bridge files |
I've been away from guitar building for almost 10 years but recently got an entry level CNC from someone local and that is getting me interested in building again. It's one of the Chinese 6040 machines with 1500W spindle running Mach3 (don't laugh, I know you guys use REAL CNC machines). I would like to have a larger, better machine but just don't have the room for anything much bigger right now. Does anyone know where I can get a file for a Martin 25.4 fretboard and a Martin bridge? I have downloaded Fusion 360, but it's going to be sometime before I can actually design something in 360 myself. However, I have successfully engraved a square in a piece of pine so far.... Any help would be greatly appreciated. Alan |
|
| Author: | Gasawdust [ Tue Mar 29, 2022 3:19 pm ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Alan, Go to Grabcad.com and do a search but leave out “Martin”. You’ll find what you’re looking for but then your real work begins. Tom |
|
| Author: | ballbanjos [ Tue Mar 29, 2022 5:00 pm ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Nothing wrong with a Chinese 6040 machine and Mach 3. You can do a lot with that. Like Tom said, check out Grabcad.com. There's a lot of stuff out there. Dave |
|
| Author: | AlanC [ Wed Mar 30, 2022 4:20 pm ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Thanks for the heads up on grabcad. There's enough stuff there to keep someone busy for a long time. I tried several different searches and did find a few bridges, but couldn't find a martin 25.4 fretboard. I spent all day trying to make one myself in fusion 360 and finally gave up in frustration. If someone has another source they could point me to for a Martin fretboard, I would greatly appreciate it. I'll keep slugging away at fusion and I'm sure I'll eventually get the hang of it. It's quite a bit more sophisticated than the software I use to design projects and run my Co2 and fiber lasers, so it's going to take some time. Again, thanks. I appreciate all the help. Alan |
|
| Author: | ballbanjos [ Thu Mar 31, 2022 12:45 pm ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Here's a link to some plans that are fairly easily imported into CAD programs. They include fingerboards as well as bridges: https://genone-luthier-supply.com/collections/6-string-acoustic-guitar-plans |
|
| Author: | AlanC [ Sun Apr 03, 2022 8:02 am ] |
| Post subject: | Re: Martin Fretboard and bridge files |
ballbanjos wrote: Here's a link to some plans that are fairly easily imported into CAD programs. They include fingerboards as well as bridges: https://genone-luthier-supply.com/collections/6-string-acoustic-guitar-plans Thanks. I purchased the fretboard design from them for $30. Would like to have the bridge design from them as well, but it was another $30. I need to order some bits now and start practicing on some scrap wood. Alan |
|
| Author: | Gasawdust [ Sun Apr 03, 2022 5:13 pm ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Alan, Pm me your email address and I’ll send you a few bridge files for you to play around with, both belly and pyramid style. Tom |
|
| Author: | AlanC [ Tue Apr 05, 2022 11:12 am ] |
| Post subject: | Re: Martin Fretboard and bridge files |
Gasawdust wrote: Alan, Pm me your email address and I’ll send you a few bridge files for you to play around with, both belly and pyramid style. Tom Thanks Tom! PM sent. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|