You are so cool Andy.
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
![[clap]](./images/smilies/smiley32.gif "adulations")
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Radius dish files http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10106&t=39828 |
Page 1 of 1 |
| Author: | aqualibguitars [ Sun Mar 24, 2013 3:37 pm ] |
| Post subject: | Radius dish files |
Hello friends i have a Vmc in my neighbour hood i want to make my own raduis dish. does any one have STP or IGES files of radius dish? it wil be a favour on me |
|
| Author: | Andy Birko [ Sun Mar 24, 2013 8:06 pm ] |
| Post subject: | Re: Radius dish files |
What radius, diameter and thickness at the center do you want? |
|
| Author: | aqualibguitars [ Mon Mar 25, 2013 5:05 am ] |
| Post subject: | Re: Radius dish files |
Thanks for ur reply i want any radius. but i think 15-20 foot radius is preferable for back and 3-40' is for tops i want diameter of the dish about 24" . waiting for ur help |
|
| Author: | ZekeM [ Mon Mar 25, 2013 6:52 am ] |
| Post subject: | Re: Radius dish files |
Anyone with CAM/CAD could whip u out a program in no time at all. You just need to specify what you want and what tools you have available. A 3/4" ball end mill will have a different tool path than a 1/2" or 1" ball end mill. |
|
| Author: | Andy Birko [ Mon Mar 25, 2013 7:47 am ] |
| Post subject: | Re: Radius dish files |
aqualibguitars wrote: Thanks for ur reply i want any radius. but i think 15-20 foot radius is preferable for back and 3-40' is for tops i want diameter of the dish about 24" . waiting for ur help Just tell me exactly what radiuses you'd like. It will take less than 3 minutes to make an iges file for that. |
|
| Author: | aqualibguitars [ Mon Mar 25, 2013 7:54 am ] |
| Post subject: | Re: Radius dish files |
i like 15, for back and 40 for tops |
|
| Author: | Andy Birko [ Mon Mar 25, 2013 9:59 am ] |
| Post subject: | Re: Radius dish files |
The forum won't accept files with the .igs extension so I changed it to pdf which the forum will accept. Change the extension back to .igs once you've downloaded it and it should work. If it doesn't, send me a PM with your e-mail and I'll send them to you. |
|
| Author: | John Killin [ Mon Mar 25, 2013 10:06 am ] |
| Post subject: | Re: Radius dish files |
You are so cool Andy.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|