| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Tailpiece update http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10106&t=39808 |
Page 1 of 1 |
| Author: | dberkowitz [ Fri Mar 22, 2013 6:57 pm ] |
| Post subject: | Tailpiece update |
I just got the tailpiece for the doubleneck project from the machine shop. In a word, they did a fantastic job. I had a little bit of sanding to do before I put it in the tumbler to matte the finish before anodizing. I want to give a shout out to Brian Hess, and the folks at Astro Machine Works, http://www.astromachineworks.com, whose bid was several times less than other proposals. They were great to work with. I highly recommend them. |
|
| Author: | Bob Garrish [ Fri Mar 22, 2013 7:28 pm ] |
| Post subject: | Re: Tailpiece update |
Pics! |
|
| Author: | Chris Pile [ Fri Mar 22, 2013 10:11 pm ] |
| Post subject: | Re: Tailpiece update |
Quote: Pics! ^^^^^ What Bob said. ^^^^^ |
|
| Author: | Andy Birko [ Sat Mar 23, 2013 7:14 am ] |
| Post subject: | Re: Tailpiece update |
Or it didn't happen! |
|
| Author: | dberkowitz [ Sat Mar 23, 2013 7:26 am ] |
| Post subject: | Re: Tailpiece update |
Alas, I won't post pictures until the whole project is done. I deliberately didn't have it anodized until it gets fitted to the body so there would be no risk of getting it scratched. There is a possibility of an article, so in deference to the publisher I can't post pictures. Rest assured, the part exists much to my relief. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|