| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Carved top electric model http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10106&t=27131 |
Page 1 of 1 |
| Author: | BobK [ Fri Apr 23, 2010 9:01 pm ] |
| Post subject: | Carved top electric model |
I've been struggling with a carved top model for a while and had a breakthrough this week. The contours aren't nearly as elegant as a PRS, but I'm going to give it a go with some mdf this weekend. Anyone know where I can find dimensions for a single coil pick up and a tremolo cavity? Thanks for looking, Bob Attachment: electric body profile.JPG Attachment: electric back.JPG
|
|
| Author: | Mike Kroening [ Sat Apr 24, 2010 2:50 am ] |
| Post subject: | Re: Carved top electric model |
What type of tremolo? |
|
| Author: | BobK [ Sat Apr 24, 2010 8:06 am ] |
| Post subject: | Re: Carved top electric model |
Ahh, that would help. Haven't decided between Wilkinson D18 http://store.guitarfetish.com/wistsatrfial.html and VS100n http://www.stewmac.com/shop/Bridges,_tailpieces/Electric_guitar_tremolos/Wilkinson_Gotoh_VS-100N_Tremolo.html Bob |
|
| Author: | Mike Kroening [ Sun Apr 25, 2010 10:32 am ] |
| Post subject: | Re: Carved top electric model |
Hi Bob, I've sent you a PM. I'm currently having problems with my FTP account on my website so I can't upload a file for you so I will need to email it to you. Mike |
|
| Author: | BobK [ Sat May 08, 2010 6:17 pm ] |
| Post subject: | Re: Carved top electric model |
Decided to redraw this as a set neck. I added a foot for additional glue surface for the neck joint. I figured a pocket extending 1.5" into the body should provide enough strength. Also played with the top a little more. Hoping to run a test cut tomorrow. Attachment: set neck 1.JPG Attachment: set neck 2.JPG
|
|
| Author: | Parser [ Sun May 09, 2010 7:26 am ] |
| Post subject: | Re: Carved top electric model |
Hey Bob, it looks like it is coming along nicely...! You might want to take a look at the heel of the neck though, it looks like it could stand to be elongated a bit... Trev |
|
| Author: | BobK [ Sun May 09, 2010 1:08 pm ] |
| Post subject: | Re: Carved top electric model |
Thanks for the input Trev. I was hoping to keep the surface between the fretboard and pickup, but it looks like I'll have to rethink... |
|
| Author: | Parser [ Sun May 09, 2010 5:40 pm ] |
| Post subject: | Re: Carved top electric model |
The top carve looks pretty cool & that's one of the hardest things to do. I really dig the little reverse hand carve thing too (the scalloped area on the back of the guitar)...nice work! |
|
| Author: | BobK [ Sun May 09, 2010 8:45 pm ] |
| Post subject: | Re: Carved top electric model |
I cut a test top this afternoon. I really like the shape from the middle pickup and higher, but I'm not sure about the lower half. The carve "feels" a little too abrupt. I didn't want something that looked like a simple radius, but maybe I got a little carried away with the shape. Have to stare at it for a couple of days and see if it grows on me. |
|
| Author: | Parser [ Sun May 09, 2010 9:01 pm ] |
| Post subject: | Re: Carved top electric model |
I always figured that was one of the coolest things about CNC. It's relatively easy to make whatever it is that you want; the real question is what do you want? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|