| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Inexpensive CNC Controller http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10106&t=26948 |
Page 1 of 1 |
| Author: | npalen [ Mon Apr 12, 2010 8:20 am ] |
| Post subject: | Inexpensive CNC Controller |
http://salecnc.com/catalog/product_info.php?products_id=79 |
|
| Author: | Mitch Cain [ Tue Apr 13, 2010 7:47 am ] |
| Post subject: | Re: Inexpensive CNC Controller |
That's not $160 for the controller is it? It looks like its just for the BOB... |
|
| Author: | npalen [ Tue Apr 13, 2010 7:56 am ] |
| Post subject: | Re: Inexpensive CNC Controller |
That's right and just a small part of the total cost. Nelson |
|
| Author: | Bob Garrish [ Tue Apr 13, 2010 2:51 pm ] |
| Post subject: | Re: Inexpensive CNC Controller |
Once you stick in the cost of Mach, you're already looking at the cost of a KFlop or even more http://dynomotion.com/ (and the KFlop is a seriously nice controller) |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|