MrC,
You are such a Kind and Generous man!!!
You have already donated the wood for the body and you keep on giving!!
What can we say except THANK YOU!
Walter Kiralla
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Charity Guitar: startup http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=2574 |
Page 1 of 1 |
| Author: | Jerry Hossom [ Sun Jul 24, 2005 9:50 am ] |
| Post subject: | |
I offered to buy the truss rod. I just need a company, part number and the address of the person to whom it should be shipped. If something else is needed I'd be happy to get that as well. Let me know what and to whom. |
|
| Author: | Don A [ Sun Jul 24, 2005 10:06 am ] |
| Post subject: | |
Michael, I'm suppling the K&K Pure Western. As Crazymanmichael is doing the final setup, should I send it to him now or hold off until we get there? By the way, Bruce Dickey gave me a discount on the pickup so it would be nice to add him as a contributor. |
|
| Author: | Bobc [ Sun Jul 24, 2005 10:53 am ] |
| Post subject: | |
Michael I can cover these ebony bridge blank bloodwood fretboard binding ebony peghead overlay |
|
| Author: | WalterK [ Sun Jul 24, 2005 11:09 am ] |
| Post subject: | |
MrC, You are such a Kind and Generous man!!! You have already donated the wood for the body and you keep on giving!! What can we say except THANK YOU! Walter Kiralla
|
|
| Author: | Bobc [ Sun Jul 24, 2005 12:58 pm ] |
| Post subject: | |
Thanks Walter and Michael for the kind words. Michael as I said before just remind me when and to whom to ship. God Bless |
|
| Author: | Jason [ Sun Jul 24, 2005 3:26 pm ] |
| Post subject: | |
Yup I just need addresses and I'll send it off. And if there are any special thickness requirments or anything? I think our brace stock is 3/4 or 5/8ths.. can't remember.. I can cut some new stuff if needed |
|
| Author: | crazymanmichael [ Sun Jul 24, 2005 4:58 pm ] |
| Post subject: | |
don please hang on to the pickup until we get close to the time it will be needed. i am going to be shifting shop premises soon and the less i have to move, not to mention misplace, the better. |
|
| Author: | John How [ Mon Jul 25, 2005 1:30 am ] |
| Post subject: | |
Jerry, I am building the neck and my preference for a truss rod is the LMI or Allied two way adjustable. I'm not sure what the length requirementis yet but I assume we are building a 14 fret (we'll have to find out the scale) but probably their standard acoustic guitar size is what we need. LMI # = TRSD, Allied # = PTR2W. Either one of those will be fine. |
|
| Author: | Jerry Hossom [ Mon Jul 25, 2005 1:37 am ] |
| Post subject: | |
Hmm... John, I was told Paul Davis was installing the truss rod, and that's what's listed above. Paul also suggested the LMI #TRSD which I'm happy to get. I just need to know who gets it for sure. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|