Next up are 2 opportunity priced sets of Indian Rosewood. Both will make excellent guitars and are priced nice and low
EIR set 1
asking: $25
status: Sold! to Sam
issues: small area of mineral deposit in sides, knot shadow on back side of 1 back plate, should not show through if you sand from the back
back set: 8 1/2x22x.15
sides:5x34x.15
This photo is the last one in the post above, I don't know how to get it out and here, where it should be! Sorry.
EIR set 2
asking: $25
status: Sold! to Lillian
issues: small tiny knot/burl cluster in lower bout. It is stable. Some pinholes along the center seam, easily fixed. The sides go flat a bit at the end too. Has better color.
Back set:8 3/8x22 1/2x.15
sides:5x33x.125
Attachment:
olfsm eir b whole.JPG
Attachment:
olfsm eir b flaws.JPG
And last but certainly not least is a perfect set of Brazilian Rosewood. This is grandfather wood resawn by me. It came off of the saw flat and hasn't moved. Deep chocolate/wine color with tight grain and big ink lines in the back, light spiderwebbing in the sides. All quarter to rift except the sides flat out a little at the very bottom. Excellent tap and has the great BRW smell. I realize it is very expensive, but it is a really great set.
asking: $1000
status:
availableissues: the only thing I can find is a very small knot shadow in the sides(see photo)
back set:7 5/8-9x34x.135(low spots are .12)
sides:4 1/4-4 5/8x35x.14
Attachment:
olfsm braz whole.JPG
Attachment:
olfsm braz back.JPG
Attachment:
olfsm braz sides.JPG
Attachment:
olfsm braz sides 2.JPG
Thanks for looking. I may have more stuff coming, I'll poke around the deep corners of the shop!