[QUOTE=crazymanmichael] what do you intend using it for?
[/QUOTE]
Beer straws
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Anybody used Thera-Band latex tubing? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=15318 |
Page 1 of 1 |
| Author: | burbank [ Thu Jan 10, 2008 6:28 am ] |
| Post subject: | |
I'm thinking of trying some of this stuff for binding. Anybody used it? |
|
| Author: | burbank [ Thu Jan 10, 2008 6:29 am ] |
| Post subject: | |
Oops. link |
|
| Author: | crazymanmichael [ Thu Jan 10, 2008 6:46 am ] |
| Post subject: | |
what do you intend using it for? |
|
| Author: | Michael Dale Payne [ Thu Jan 10, 2008 6:58 am ] |
| Post subject: | |
[QUOTE=crazymanmichael] what do you intend using it for? [/QUOTE] Beer straws
|
|
| Author: | burbank [ Thu Jan 10, 2008 7:26 am ] |
| Post subject: | |
[QUOTE=MichaelP] [QUOTE=crazymanmichael] what do you intend using it for? [/QUOTE] Beer straws [/QUOTE]
Yup! Michael, your thread about surgical rubber got me thinking about this tubing to wrap the body after binding, not as a binding material as my original post may have suggested. |
|
| Author: | Michael Dale Payne [ Thu Jan 10, 2008 7:36 am ] |
| Post subject: | |
I gathered as much I just having a manic day
I tried surgical tubing, Not this stuff, and it worked great. However I did like Todd showed in the other topic and taped first then used the tubing to draw in good and tight. I am trying to design a system that where I don't use tape at all and clamp with band as I work my way around. |
|
| Author: | Kirt Myers [ Thu Jan 10, 2008 7:38 am ] |
| Post subject: | |
They make flat banding too. seems like it would be less likely to roll around as you position it. Kinda wide but easy enough to cut. Here's a source..... http://www.fwonline.com/lftbands.htm Cheers |
|
| Author: | burbank [ Thu Jan 10, 2008 7:58 am ] |
| Post subject: | |
Hmmm. Kirt, I hadn't thought of the bands. I even have some at home. Also, it could cover a much wider bit of binding than the tubing. Now to find out what "synthetic elastomer" means. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|