| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Needed 14 fret parlor plan http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=15222 |
Page 1 of 1 |
| Author: | Ricardo [ Wed Jan 02, 2008 10:38 am ] |
| Post subject: | |
I've gotten some advice on plans for a parlor, but most seem to be small Martin 5 size or slot headed and 12 fret. I'd like to go a bit bigger (ub 13 1/8" and lb 9 1/8") like a Larrivee with a 14 to body neck. So far I haven't come across a plan that fills the bill. Thanks |
|
| Author: | jonhfry [ Wed Jan 02, 2008 10:46 am ] |
| Post subject: | |
I would second that. Any leads would be appreciated. |
|
| Author: | letseatpaste [ Wed Jan 02, 2008 1:21 pm ] |
| Post subject: | |
Check out this old thread. You can download pdf or autocad files of a tracing of a 1937 0-18 14-fret. The links are still active. If you don't have cad software, you can print out the pdf on letter size sheets to tape together for a full size pattern. I don't have any of the bracing info. link You might also look on the Unofficial Martin Guitar Forum, http://www.umgf.com and stickied to the top of the Technical section is a discussion where folks have posted pics of their Martins with a light on the inside so you can see the outline of the braces. I think there were some 0-size 14-fretters in there. Not exact, but should give you an idea. |
|
| Author: | Ricardo [ Wed Jan 02, 2008 4:02 pm ] |
| Post subject: | |
Great, thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|