Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Custom Headstocks
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14938		 Page 1 of 1
Author:  Lab1 [ Thu Dec 13, 2007 2:27 am ]
Post subject: 
Hey Guys....Is there a place where you can buy custom made headstocks.....Maybe , when I am as as rich as you fellows I will buy a CNC machine ........Looking at something simple,,Maybe....
...Labrador Guitars" with the emblem of the Labrador spruce twig underneath.....Just toying with the idea....Nothing worse then a blank headstock....Kind of like have a baby with no name....Larry
Author:  Hesh [ Thu Dec 13, 2007 2:33 am ]
Post subject: 
Larry buddy if you want the benefit of a true artist's eye try the links above for:

Craig Lavin
Paul Bordeaux
Author:  Michael Dale Payne [ Thu Dec 13, 2007 4:29 am ]
Post subject: 
Larry,

If you can inlay there is also Andy DePaule. He will take your are and have his guys cut the shell and provide it to you. His prices are really unbelievable for the quality of work. But he only supplies the cut shell not the shell pre inlaid. Andy makes all my logos and custom cuts shell for custom inlays. The turn around is usually about 3 weeks. But like I said you would have to do the inlaying.

This may seem like an overly daunting task at first but it really is not that hard, Like most tasks in lutherie it more a matter of taking your time and being patent.
Author:  Michael Dale Payne [ Thu Dec 13, 2007 4:30 am ]
Post subject: 
Larry,

If you can inlay there is also Andy DePaule. He will take your art and have his guys cut the shell and provide it to you. His prices are really unbelievable for the quality of work. But he only supplies the cut shell not the shell pre inlaid. Andy makes all my logos and custom cuts shell for custom inlays. The turn around is usually about 3 weeks. But like I said you would have to do the inlaying.

This may seem like an overly daunting task at first but it really is not that hard, Like most tasks in lutherie it more a matter of taking your time and being patent.


Author:  Shane Neifer [ Thu Dec 13, 2007 7:36 am ]
Post subject: 
Get a hold of Bob Garrish....Saint Lutherie. He is in Nova Scotia and does GREAT work! He is a sponsor here and his link is above in the sponsor's section.

Shane
Author:  Bob Garrish [ Thu Dec 13, 2007 7:51 am ]
Post subject: 
With the exception of the big order guys (100 necks, that sort of thing), headplates are something like 2/3 of my orders from luthiers. There are prices on the website, and photos of some of the plates and logos I've done for others on here and elsewhere.

I make some pretty nice logos for some of the members here.

That's Peter Marreiros' logo in brass, MOP, and abalone. I also made the pocketed headplates for him, but the logos came in a few different colour combinations so I sent them uninlaid so he could combine them as he chose.
Author:  Jody [ Thu Dec 13, 2007 9:48 am ]
Post subject: 
 Nice work Bob! where do you find the thin brass???     Jody
Author:  KenH [ Thu Dec 13, 2007 10:46 am ]
Post subject: 

Bob made all of my headstock inlays too !!!
Author:  Bob Garrish [ Thu Dec 13, 2007 11:51 am ]
Post subject: 
[QUOTE=Jody] Nice work Bob! where do you find the thin brass???     Jody[/QUOTE]

The outlines are milled in one piece from brass plate. You can get the plate at most hobby shops. The stuff I used was 1/16" to start then I milled it down to 0.05".
Author:  Hesh [ Thu Dec 13, 2007 12:08 pm ]
Post subject: 
I just wanted something very simple for my guitars and John Watkins did a great job on mine - I could not be more pleased.





The second pic is of a BRW head plate that was/is fitch matched to the set that I used on the BRW guitar that I just finished.  I book matched the head plate, sent it to John, and in no time at all I had a perfect match for my BRW guitar.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/