TODD
THANKS for the info about the cases!!
walter
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Parlor Guitar Case http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14811 |
Page 1 of 1 |
| Author: | RayH [ Tue Dec 04, 2007 1:36 pm ] |
| Post subject: | |
Hello, Anyone know of a resonably priced place to pick up a case for an Art&Lutherie Ami parlor style guitar? Thanks, Ray |
|
| Author: | KenH [ Tue Dec 04, 2007 2:13 pm ] |
| Post subject: | |
If you havent already done so, Give Nancy a call over at Ameritage. You will be amazed at how reasonable they can be with custom made cases. |
|
| Author: | KenH [ Tue Dec 04, 2007 3:17 pm ] |
| Post subject: | |
WOW that is even better and dang cheap too! |
|
| Author: | WalterK [ Tue Dec 04, 2007 8:46 pm ] |
| Post subject: | |
TODD THANKS for the info about the cases!! walter
|
|
| Author: | TonyKarol [ Tue Dec 04, 2007 11:57 pm ] |
| Post subject: | |
I have a similar case, also built in the same factory, same specs, same price roughly ... it's designed to fit Martin 0 (about 13.5 lower), black with green crush inside, it was custom ordered by my local supplier, and its possible he may have more .. try Heinls violin shop in Toronto. |
|
| Author: | sharp_custom [ Wed Dec 05, 2007 3:12 am ] |
| Post subject: | |
HERE'S ONE |
|
| Author: | RayH [ Wed Dec 05, 2007 1:25 pm ] |
| Post subject: | |
Hey Guys, Thanks very much for all the leads!! Should have a case very soon! Also, does anyone know who manufactures Canadian Cases? Who are they? |
|
| Author: | douglas ingram [ Wed Dec 05, 2007 4:36 pm ] |
| Post subject: | |
So the "Canadian" case was made in the states? |
|
| Author: | TonyKarol [ Thu Dec 06, 2007 12:25 am ] |
| Post subject: | |
Nope .. not likely .. the std TKLs are mostly made at a factory in Quebec, not sure the name. Most likely because at one point in time, the dollar made it very economical to do so ... slipping .. slipping I know for a fact that the same case was cheaper here than in the US (got to talking with Andrew White at one of the Cdn shows) .. shipping and border handling likely accounted for some of the differences. Not surprising.... lots of stuff is more here than in the US when made there. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|