| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Seeking some help with student donations http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14797 |
Page 1 of 2 |
| Author: | af_one [ Mon Dec 03, 2007 12:14 pm ] |
| Post subject: | |
Hey folks, I hope this isn't to forward: I teach at our local high school, I actually direct an Air Force JROTC program there, and I had one of the science teachers come to me today because he heard I build acoustics. Long and short of it is, the students are entering the Science Olympiad and they have to build two instruments; document the builds, and define and describe what and how the sounds are made and what changes to the build will effect those sounds. I obviously agreed to help this group of high school students. They ahve to build the guitar all by themselves and I will supervise with the Science teacher. What we could use are some materials. I thought if someone had orphaned sides (bent would be nice or back and maybe a top that has flaws; a neck that has some slight defects--you get the picture. Anything you don't think you can use because of cosmetic issues etc., we can use them. The kids will not be judged on perfection of apperance. Also, what a great way to introduce our craft to some high school kids. If you have something you can donate or if you have multiple items, I would pay the shipping--its worth it. Please PM me or email me at sjkolar@comcast.net. I'll keep teh thread updated so I don't duplicate and donations. Thanks in advance! |
|
| Author: | Hesh [ Mon Dec 03, 2007 2:02 pm ] |
| Post subject: | |
What size guitar Scott buddy? |
|
| Author: | Hesh [ Mon Dec 03, 2007 2:18 pm ] |
| Post subject: | |
If you are building an OM, or wish to, I have a top for you that is ready to go. It had one spot that I had to sand out a slight pitch pocket and that spot got to thin for my liking and I was concerned that I would see a dip in the finish (.085). But if you brace it as per most plans (to heavy) it should be fine. It is ready to install and has a nice BRW rosette installed. BTW this is a great thing that you are doing Scott.    |
|
| Author: | af_one [ Mon Dec 03, 2007 2:33 pm ] |
| Post subject: | |
I'll take it pal. Looks like were building an OM. Thanks Hesh, as I mentioned to Ken, this is a group of 13 students that are really enthusiastic and motivated towarsd building. I may even start an afterschool program so the kids can learn and build. Nothing better than working with the kids and seeing that sense of pride and accomplishment when they are finished--PRICELESS! |
|
| Author: | PDeWitt [ Mon Dec 03, 2007 2:38 pm ] |
| Post subject: | |
Scott, I don't have anything to offer (new to building), but I too teach high school science, and this is quite a wonderful thing for those kids (and you and the other teacher). Please post pictures or reports of how they are enjoying it if you have time at some point! Wonderful! |
|
| Author: | Dennis Leahy [ Mon Dec 03, 2007 4:43 pm ] |
| Post subject: | |
Scott, Very cool! Man, what a great opportunity for those kids, and you! How about a figured Maple back & side set? I'll just need your mailing address. Dennis |
|
| Author: | DP LaPlante [ Mon Dec 03, 2007 5:26 pm ] |
| Post subject: | |
PM sent. |
|
| Author: | Bobc [ Mon Dec 03, 2007 9:19 pm ] |
| Post subject: | |
Scott I'm sure I can help. Let me know what you need. |
|
| Author: | robertD [ Mon Dec 03, 2007 10:03 pm ] |
| Post subject: | |
Hi Scott, A very worthy task you’ve taken on, indeed! Do you need any other kind of guitar parts? If so, I have two sets of “Ping” tuning machines (Chrome). I know they’re not the best, but, they’re not bad. Robert |
|
| Author: | Hibdon Hardwood [ Tue Dec 04, 2007 1:12 am ] |
| Post subject: | |
Scott, we would be thrilled to make a few donations to your group of JROTC students! I have sent a PM with contact info.
|
|
| Author: | af_one [ Tue Dec 04, 2007 2:06 am ] |
| Post subject: | |
Andrew, I responded to your PM and thank you VERY much!! |
|
| Author: | Pwoolson [ Tue Dec 04, 2007 2:11 am ] |
| Post subject: | |
Scott, I can set you up with a neck (or more if you need them). I've got some that I experimented with that are of a different lamination layup that I'm currently using. Drop me a PM with your address and I'll get something right out to you. Best, Paul |
|
| Author: | af_one [ Tue Dec 04, 2007 2:22 am ] |
| Post subject: | |
Update: First, I am overwhelmed by the generosity of this community. I just wanted to claify the intent--The original plan was to build two acoustic for the Science Olympiad. This team is made up of honor students from the Science Department, and I offered my assistance to help them. However, I have 9 of my 226 cadets that are REALLY into guitar and have been begging me for the last year to start an after school program in acoustic building. With the generous donations you guys are making, I've decided to use the additional material--whatever that may be--to start that program. I've decided that I will bring some of my equipment (fox bender) etc, to my classroom and build two days a week after school. I will break the kids down into groups of 3 for the builds and when we have completed the builds, I will draw names and those lucky individuals will get to keep them--talk about something they will cherish! I will photo document the entire builds and have the students keep detailed notes on the builds. The students that receive the guitars at the end will be required to write a short essay and also write a thank you letter to the sponsors that I will post. Might as well tie into education! If you can help, please email or PM, and I'll keep you updated. Thanks again! |
|
| Author: | tippie53 [ Tue Dec 04, 2007 4:38 am ] |
| Post subject: | |
Let me know what you need. I can supply you with what every you don;t get. Call me or email me at tippie@epix.net |
|
| Author: | Shane Neifer [ Tue Dec 04, 2007 4:52 am ] |
| Post subject: | |
Scott, I can supply some lower grade, but nice and stiff tops for your builds. Let me know. Thanks Shane |
|
| Author: | fryovanni [ Tue Dec 04, 2007 1:01 pm ] |
| Post subject: | |
Scott, I would be happy to help out. Post up a list of what you are still in need of. Tuners, bridge blanks, fretboard blanks, back/side sets, soundboards, binding, truss rods, bracing stock, veneers or whatever. Peace,Rich |
|
| Author: | Blain [ Tue Dec 04, 2007 4:40 pm ] |
| Post subject: | |
Scott, I don't have a lot in the line of materials, but I have an extra set of the OLF OM plans that I would be more than happy to send you if you could use them. |
|
| Author: | af_one [ Tue Dec 04, 2007 11:39 pm ] |
| Post subject: | |
Blain, the Plans would be fantastic--I don't have a set of OM's. I'll PM you an address, Thanks, Scott |
|
| Author: | Colonial Tonwds [ Tue Dec 04, 2007 11:59 pm ] |
| Post subject: | |
I with Bob C., let me know what you need, backs and sides, kerfing, bracewood, purflings, bindings, bridge blanks, etc. I'd be happy to help you get this project going. Stephen |
|
| Author: | blindreality [ Wed Dec 05, 2007 12:04 am ] |
| Post subject: | |
I think this is an awesome undertaking! Bravo! I'll see if I can come up with a set of tuners. |
|
| Author: | tippie53 [ Wed Dec 05, 2007 12:25 am ] |
| Post subject: | |
This is the nice thing about this place. While we may have a spat now and then we do all pull together for something like this to all BRAVO john hall |
|
| Author: | Bill Greene [ Wed Dec 05, 2007 12:28 am ] |
| Post subject: | |
Same here...I'm willing to help, and without a doubt I've got some stuff laying around that you could use, or use for practice, or experiment with related to your sound project. Get a list together if you can. In the meantime, I'll start putting some stuff together. Bill |
|
| Author: | af_one [ Wed Dec 05, 2007 12:53 am ] |
| Post subject: | |
Hey John, funny thing is, it usually takes kids to bring people together, they are whats important! |
|
| Author: | Bob Garrish [ Wed Dec 05, 2007 9:12 am ] |
| Post subject: | |
I can throw together a pair of the hard(wood) parts for the science guitars. Bridges, fretboards, and headplates inlaid with the team name or what-have-you. For the after school program, I can cut you my lowest volume prices on any parts I do. |
|
| Author: | af_one [ Wed Dec 05, 2007 10:01 am ] |
| Post subject: | |
Bob, thast very gracious and cool! I sent you a PM. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|