Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 11:38 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject:
PostPosted: Fri Nov 30, 2007 12:43 pm 
Offline
Mahogany
Mahogany

Joined: Mon Sep 18, 2006 12:31 am
Posts: 49
Location: Vietnam
Can anyone please explain to me how fret size affects playability, tone and anything else you can think of. I am faced with making a decision without any idea about size.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 30, 2007 1:32 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

I tend to opt for the medium size frets for playability and durability too.


If you get the frets too high, you can actually make the strings go out of tune if you have too heavy of a grip. I have an electric that is giving me that problem right now and will most likely be re-fretted in the near future.


If you get the frets too low, you can cause undue wear on the fretboard because your fingertips will dig in further than normal. You can get an "electrc guitar" feel with the lower frets and also lower action, but the trade off is lack of volume in the acoustic realm.


All in all, the medium size frets are the best bet.


_________________
Reguards,

Ken H


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 30, 2007 1:49 pm 
Offline
Koa
Koa

Joined: Sat Aug 04, 2007 10:37 am
Posts: 590
Location: United States
First name: Michael
Last Name: Shaw
City: Phila
State: PA
Zip/Postal Code: 19125
Country: United States
I prefer Mediums myself. But I know some hard rockers and heavy metallers who like jumbos. If you play a lot of hammer on pull off style taller frets seem to have some benifit because of less less finger contact with the fingerboard. If your tallking acoustics I would stick with mediums.

_________________
Guitars, guitars and more guitars.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 30, 2007 3:17 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Stew-mac medium/medium here, I think it is the 148 wire.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 01, 2007 1:50 am 
Offline
Koa
Koa

Joined: Wed Jun 01, 2005 6:35 am
Posts: 1325
Location: Kings Mtn., NC, USA
First name: Bill
Last Name: Greene
City: Kings Mountain
State: North Carolina
Zip/Postal Code: 28086
Country: USA
Focus: Build
Status: Amateur
I've fallen in love with the Jim Dunlop 6105, which is a medium/large. A friend turned me onto it, and I haven't looked back.


_________________
Eagles may soar, but weasels don't get sucked into jet engines.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 01, 2007 2:23 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 25, 2007 12:59 pm
Posts: 241

Folks have their preference for crown size but I think the tang size is also very important. Adjusting the tang size to fret slot size upward can stiffen an otherwise flexible neck. On the other hand reducing the size can prevent back-bowing a neck in fretting such as on a classical guitar.


Martin sells fret wire in .010" increments from .0185", .0195 etc. through .0275" refret sizes.



Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 01, 2007 3:58 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Medium-High (SM#141) for me. I like the fact that they respond to a light touch. I have not experienced any intonation problems. I have used these same frets on 2 electrics as well and the players prefer them over the lower frets they were used to.

That's good for me since I can now buy only one size in quantity.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com