Don,
Try contacting Tim McKnight. Word is he's got a bunch
for free!
steve
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Black Line Spalted Maple http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14725 |
Page 1 of 1 |
| Author: | sharp_custom [ Wed Nov 28, 2007 10:21 am ] |
| Post subject: | |
Does anyone know where I can get some black line spalted maple for rosettes and end grafts? thanks, Don |
|
| Author: | FishtownMike [ Wed Nov 28, 2007 12:21 pm ] |
| Post subject: | |
I recommend looking at some of the wood dealers above. i'm sue you'll find someone that has it. Mike |
|
| Author: | Pwoolson [ Wed Nov 28, 2007 12:26 pm ] |
| Post subject: | |
Don, I sent you a PM. Drop me an email if you didn't get it. paul at woolsonsoundcraft dot com |
|
| Author: | Bob Garrish [ Wed Nov 28, 2007 12:33 pm ] |
| Post subject: | |
If not, there's load and loads and also a bunch of it on eBay. |
|
| Author: | Bill Bergman [ Wed Nov 28, 2007 12:59 pm ] |
| Post subject: | |
Look on ebay "spalted maple". |
|
| Author: | davidmor [ Wed Nov 28, 2007 2:10 pm ] |
| Post subject: | |
I got some from Bob at RCtonewoods not too long ago. |
|
| Author: | Tom Armstrong [ Thu Nov 29, 2007 8:58 am ] |
| Post subject: | |
springerlumber.com |
|
| Author: | Tim McKnight [ Thu Nov 29, 2007 1:42 pm ] |
| Post subject: | |
Look in yours or your neighbor's firewood pile. Anyone who burns maple will have lots of spalted maple in firewood. That is where I get mine from. We have salvaged LOTS of it for free. Get a few chunks, resaw it on your bandsaw, sticker it and a year later you will have lots of rosette wood. |
|
| Author: | joelThompson [ Sat Dec 01, 2007 7:09 am ] |
| Post subject: | |
A second for springer lumber here i have got some stunning spalted maple from them over the last year or so, Joel. |
|
| Author: | Steve Kinnaird [ Sat Dec 01, 2007 2:54 pm ] |
| Post subject: | |
Don, Try contacting Tim McKnight. Word is he's got a bunch for free!
steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|