Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 9:29 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject:
PostPosted: Tue Oct 30, 2007 8:41 am 
Offline
Koa
Koa

Joined: Sat Jun 17, 2006 8:29 am
Posts: 960
Location: Northern Ireland
First name: Martin
Last Name: Edwards
Focus: Build
Status: Amateur
Hi gang, I know there's a reso section, but it's pretty quiet in there.......

I'm in conversation with a guy who may want me to build him a 12 string resonator along the lines of this beast on ebay.......



I'm thinking either Mahogany or Maple, top, back & sides with a neck to match.

Two MAIN gaps in my understanding.......

the 6 a side slot head tuners..... I vaguely remember someone asking about these a while ago and getting not a lot of good news..... Anyone know are these available for a sensible price or do I try to talk the guy round to regular tuners?

the other diff is the geometry of the cones & tone rings. (single cones)

As I understand it, the biscuit bridged resos have a low ring attached to the back of the guitar that the edge of the cone sits on. holes on the ring at the back allow airflow.

A spider bridged reso has a deep sound well with holes cut around it, and the cone attaches to this at the same level as the top of the guitar, with the spider spaning the cone.

is this right?

I've tried to find a cutaway or sectional drawing on the interweb, but no luck so far.

Any help would be appreciated!!

Thanks


_________________
My soundclick xx luthier blog xx luthier soundclick


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 30, 2007 8:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
All of the single coil national style I have seen, had a well that hung from the top with a ledge that the cone sat on and that's the way I made mine. Some of the Nationals had a sort of sound post that ran from the back to the bottom of this ledge to help support it but those were metal bodied reso's. There should be some good info out there somewhere though. Good luck

_________________
Tickle your guitar daily, and it'll tickle you back.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 30, 2007 9:00 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
try resonation.com. They have a lot of great info there.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 30, 2007 9:01 am 
Offline
Koa
Koa
User avatar

Joined: Fri Aug 11, 2006 11:09 am
Posts: 783
Location: United States
First name: Kirby
State: Wa. ... Devoted (Inspired?) hack
Gary Drusina posted a really nice article over at the Reso-nation forum. Stewart MacDonald also has instructions for their kits online they may be of some use.

_________________
"It's a Tone Faerie thing"
"Da goal is to sharpen ur wit as well as ye Sgian Dubh"

"Sippin Loch Dhu @Black lake" ,Kirby O...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 30, 2007 9:17 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
Hope this build goes well!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com