| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| another bandsaw blade question sorry. http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14228 |
Page 1 of 1 |
| Author: | joelThompson [ Thu Oct 25, 2007 5:42 am ] |
| Post subject: | |
i have been looking for a supplier lenox tri mater that will ship to the uk. I have tried all the usual suspects (allthough i cant find an email for cyberwoodworking). Does anybody know who might be able supply me or if there are any european suppliers. I have my own ups account so shipping should be pretty painless. I just need to find someone pretty soon as i have a load of wood ready to be procesed but not much life left in my current blade. I have orderd a wood slicer for the time being from highland but realy need a 1"wide 131" long 2-3tpi tri master for my 18" jet made bandsaw. Any help i would be eternaly gratfull for. Thanks for reading, Joel. |
|
| Author: | joelThompson [ Thu Oct 25, 2007 6:12 am ] |
| Post subject: | |
its ok folks, thanks to a earlier thread i have sourced one for 159$ from u-cut after a few days of searching. i would still like to know of any european sources though, joel. |
|
| Author: | Mattia Valente [ Thu Oct 25, 2007 6:31 am ] |
| Post subject: | |
Joel: which supplier was that, and how long's your blade? That's quite a bit less than I was quoted last I checked, and I'm also shopping around for one. Did you try calling Lennox about EU distributors? |
|
| Author: | joelThompson [ Thu Oct 25, 2007 7:59 am ] |
| Post subject: | |
The supplier was u-cut (u-cut.com) and i spoke to a wonan called connie. They got back to me very quickly but said turn around would be 8-10 days my blade is 131 inches so quite long. They said they dont keep tri masters in stock and get them streight from lenox but they said that if they get more interest they will keep them in stock. I will buy from them regualry as they have good costumer service and the price is way below any other qoutes so far. As for phoning lenox no i have not but i will email them and ask to see if there is anyone. It may be the case that they dont have european distrubution. I know that laguna dont and they have much international interest (i would buy a laguna resaw king in heartbeat if i could get one in the uk). I will let you know what they say, joel. |
|
| Author: | joelThompson [ Thu Oct 25, 2007 8:10 am ] |
| Post subject: | |
Mattia, I have just looked on the lenox website and they have a distributer in the netherlands. newel tools,helmund, netherlands tel.0492 509 509. they should be perfect for you, i will still email lenox and ask them but it may well be worth checking out newel tools. I will still get this blade from u-cut though as i need it soon. let me know if you have any luck, Joel. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|