Official Luthiers Forum!

i have been looking for a supplier lenox tri mater that will ship to the uk.

I have tried all the usual suspects (allthough i cant find an email for
cyberwoodworking).

Does anybody know who might be able supply me or if there are any
european suppliers.
I have my own ups account so shipping should be pretty painless.
I just need to find someone pretty soon as i have a load of wood ready to
be procesed but not much life left in my current blade.

I have orderd a wood slicer for the time being from highland but realy
need a 1"wide 131" long 2-3tpi tri master for my 18" jet made bandsaw.

Any help i would be eternaly gratfull for.

Thanks for reading,

Joel.

its ok folks,
thanks to a earlier thread i have sourced one for 159$ from u-cut after a few
days of searching.
i would still like to know of any european sources though,

joel.

Joel: which supplier was that, and how long's your blade? That's quite a bit less than I was quoted last I checked, and I'm also shopping around for one.

Did you try calling Lennox about EU distributors?

The supplier was u-cut (u-cut.com)
and i spoke to a wonan called connie.
They got back to me very quickly but said turn around would be 8-10
days

my blade is 131 inches so quite long.

They said they dont keep tri masters in stock and get them streight from
lenox but they said that if they get more interest they will keep them in
stock.

I will buy from them regualry as they have good costumer service and the
price
is way below any other qoutes so far.

As for phoning lenox no i have not but i will email them and ask to see if
there is anyone.

It may be the case that they dont have european distrubution.
I know that laguna dont and they have much international interest (i
would buy a laguna resaw king in heartbeat if i could get one in the uk).

I will let you know what they say,
joel.

Mattia,
I have just looked on the lenox website and they have a distributer in the
netherlands.

newel tools,helmund, netherlands tel.0492 509 509.

they should be perfect for you,

i will still email lenox and ask them but it may well be worth checking out
newel tools.

I will still get this blade from u-cut though as i need it soon.

let me know if you have any luck,

Joel.