| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Outside Molds - One Method http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14138 |
Page 1 of 2 |
| Author: | Brad Way [ Thu Oct 18, 2007 1:52 pm ] |
| Post subject: | |
Great tutorial! |
|
| Author: | LaurieW [ Thu Oct 18, 2007 2:03 pm ] |
| Post subject: | |
Thanks Todd - I was wondering how others do this. Much cleaner than my method of mostly hand work. How long do you think it took from start to finish?
|
|
| Author: | Rod True [ Thu Oct 18, 2007 3:43 pm ] |
| Post subject: | |
Right on Todd. Great tutorial. I've got two new molds and bending forms to make and I'll be using your method to make the mold. Question, is it most common to make the molds 2-1/4" thick versus 3" thick? I only have two shapes I made, both the molds are 3", heavy MDF and time to re-make them. So I guess I'll have 4 molds to make 
Do the jigs ever stop 
|
|
| Author: | JohnAbercrombie [ Thu Oct 18, 2007 3:45 pm ] |
| Post subject: | |
Very nice tutorial, Todd. Thanks! This is the same style of mold that I use, and I've found it useful to put a couple of locating dowels in each end, rather than depending on the bolts alone to keep things true- my bolt holes tend to 'wear larger' since I often use the mold halves separately to hold sides, binding, etc when drying. The dowels need only extend 1/2 inch or so into the holes in the opposite side- it's an easy final step to drill for these after you have the two halves bolted together. Birch ply is the way to go if you don't have a good scrap pile! Cheers John |
|
| Author: | Allen McFarlen [ Thu Oct 18, 2007 6:57 pm ] |
| Post subject: | |
One question Todd. The slots you have put into the mold for the cutaway are a heck of a good idea, based on the trouble I had the the last one I built. Mine was a mitered Florentine. Do you miter the joint near the neck, or just butt the sides, then bind it? The reason I ask is that I figured there must be and easier way . |
|
| Author: | JJ Donohue [ Fri Oct 19, 2007 12:22 am ] |
| Post subject: | |
WOW Todd...Very nice tutorial! So far, I've found myself reviewing this post 3 times...each time I get distracted by the cool tools, equipment and details in the background. I really love that bench...especially the dovetail-detailed vice. There are so many on my list of "Shops I'd Love to Visit", and yours is near the top of that list. And once again...a superb tutorial on the construction of building molds! Even though I've built my molds differently, I will definitely try this method next time. Thanks for posting! |
|
| Author: | WaddyThomson [ Fri Oct 19, 2007 4:42 am ] |
| Post subject: | |
Well, thanks for your therapeutic efforts on behalf of those of us who are beginners. You have saved hours of "navel contemplation", and lint collection efforts. You have done a great service to the OLF, and we await your final contribution with trepidation (well at least the trembling part). We all wish you speedy flushing of your system, and a return to the real world of hurt we all face.   |
|
| Author: | csmonty [ Fri Oct 19, 2007 5:26 am ] |
| Post subject: | |
Awesome, thanks a ton, Todd! Makes me smile to see somebody work so hard and give such helpful info out for free. Time to give my printer a workout! |
|
| Author: | Bruce Dickey [ Mon Oct 22, 2007 4:49 am ] |
| Post subject: | |
Great Job Todd. Bob Connors from Geelong already has it posted in his RUNNING LINKS OF OLF TUTORIALS.
http://www.connor.net.au/olftutorial/ |
|
| Author: | FishtownMike [ Mon Oct 22, 2007 7:10 am ] |
| Post subject: | |
Great post! |
|
| Author: | Dave Anderson [ Mon Oct 22, 2007 11:58 am ] |
| Post subject: | |
Thanks Todd - Great Tutorial! This will really help when I decide to make my next mold. Great looking shop you have there btw. |
|
| Author: | RobE [ Mon Oct 22, 2007 2:09 pm ] |
| Post subject: | |
Excellent tutorial! You have made my life a lot easier when it comes to making molds. Thanks a million! -Rob |
|
| Author: | AndrewGribble [ Tue Oct 23, 2007 12:19 am ] |
| Post subject: | |
Todd, thanks for the great, and very clear tutorial. I have previously bought my molds and bending patterns, but now may have the courage to try building my own shape(s). Really looking forward to seeing your bending pattern tut. too! BTW, what type of router table do you have/how do you like it? Thanks again for the great info! I look forward to reading/seeing more of your tutorials. |
|
| Author: | snood [ Thu Oct 25, 2007 7:14 am ] |
| Post subject: | |
Awesome Todd I am about to build my 1st mold for my 2nd guitar Cheers Barry |
|
| Author: | John K [ Thu Oct 25, 2007 9:11 am ] |
| Post subject: | |
Great tutorial Todd. Thanks! John |
|
| Author: | robertD [ Thu Oct 25, 2007 10:45 pm ] |
| Post subject: | |
Todd, Fantastic tutorial! Very detailed, and the photo’s really make it easy to understand everything you’re doing! I have a question though. After sides are bent and in the mold, with spreaders in place, do you ever end up with space between sides and mold anywhere along the inside edge of the mold? Robert |
|
| Author: | robertD [ Fri Oct 26, 2007 12:46 am ] |
| Post subject: | |
Hi Todd, Thanks for answering my question! It just so happens, I’m at this stage right now. How about I post a pic of what I got later today? Robert |
|
| Author: | peterm [ Fri Oct 26, 2007 3:24 pm ] |
| Post subject: | |
Very nice....thanks for sharing. But my way to do it is way better.... I just call John Hall at Blues Creek Guitars!! 
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|