Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Chris’ Swap Stop.
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14069		 Page 1 of 1
Author:  Chris Oliver [ Mon Oct 15, 2007 1:49 am ]
Post subject: 




Hello,
For sale are the following:

Special Quartersawn Spalted Bookmatched American Sycamore sides(#2) and back. Dred size. $120.





Special Quartersawn Spalted Bookmatched American Sycamore sides(#1) $20



Special Quartersawn Spalted Bookmatched American Sycamore sides(#3)  $15


2 sets Quartersawn Spalted Bookmatched American Sycamore cutoffs 8.5" x 14"  $30 each. Big enough for a baritone ukelele! buy a  side set above and all you need is a top. If interested, I could cut more syc for a top, let me know...



Step by step instructions including diagrams to build your own Dustless Radius Dish Jig. Once built you can make your own radius jigs for only the cost of the mdf or other material of your choice!
$10 each + postage.



Hardwood go bars. $ .75 each. Order as many as you would like and specify length up to 36".



Lacewood /walnut backstrip as pictured below. 2 available.
$5.00 each. <-- Both have been SOLD.



Precise routing jig for rosettes or circle cutting. 3 available. $20 each as pictured below. Second picture is a rosette created using the jig. Router is NOT included but can be purchased for around $20 at Harbor.
These have both been SOLD. (Greg, Mike and Danny.)





Postage / shipping is actual cost and not included in the pricing above. Paypal or check accepted. First reply, first sold.
Thanks for looking.
Author:  GregH [ Mon Oct 15, 2007 2:06 am ]
Post subject: 
I would like one of the routing jigs for $20. Contact me with payment details.
Thanks,
Greg Heather
g.heather@att.net
Author:  MSpencer [ Mon Oct 15, 2007 2:09 am ]
Post subject: 
I will take the other rosette routing jig for $20.00 and the two Backstrips at $5.00 each = $10.00

Thanks

Mike
Author:  DannyV [ Mon Oct 15, 2007 2:11 am ]
Post subject: 
I'll take a circle cuttting jig.

Thanks,
Danny Vincent
Author:  Chris Oliver [ Mon Oct 15, 2007 7:53 am ]
Post subject: 

SOLD:
3 - precision router bases - $20 / each
2 - back strips - $5 / each
1 - set of plans - $10 / each
Total: $80.00



STILL AVAILABLE:
Quartersawn sycamore back and sides.
Quartersawn sycamore sides sets (#1 and #3).
Quartersawn baritone uke back sets (#4 and #5).
Plans, instructions and diagrams of the dustless radius dish jig.
Hardwood go bars.

Thanks for browsing.
chris
Author:  Keith M [ Sun Oct 21, 2007 9:32 am ]
Post subject: 
I'll take:Plans, instructions and diagrams of the dustless radius dish jig.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/