| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| JRHall’ Table (more vac pumps Sunday) http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=14058 |
Page 1 of 1 |
| Author: | JRHall [ Sun Oct 14, 2007 8:17 am ] |
| Post subject: | |
See later posts for info on more vacuum pumps. This mahogany rim came from the Guitarmakers Connection (Martin's outlet). It's a 00 size 2 7/8" at the big end and 2" at the neck.      Nothing special, but it would make a neat little thin line guitar. As before I'd like to trade for other wood, but I'll consider anything.  Let me know what you have and if it looks good I'll cover my shipping and you cover yours. Thanks Jim Hall |
|
| Author: | Brock Poling [ Mon Oct 15, 2007 1:08 am ] |
| Post subject: | |
Hey Jim. I woudl be willing to trade or buy 1 - 2 of these. I have a really nice set of Lacewood, 2 Sets of very nice black Limba A set of Bois D' Rose (a rosewood from Madagascar -- but not Dalbergia Baroni) I would trade any of these... or if you want a set of Malaysian Blackwood I would trade one very nice set of that (I have several to choose from) for 2 pumps. LMK what you think.. or I would happily just buy them. |
|
| Author: | Rod True [ Mon Oct 15, 2007 1:14 am ] |
| Post subject: | |
Jim, I'd like one of the pumps I could trade a 25' sanding dish plus a AAA lutz spruce top. |
|
| Author: | Rod True [ Mon Oct 15, 2007 1:15 am ] |
| Post subject: | |
I have other woods too but you said you wanted a sanding dish so I'm sticking with that first offer, let me know if we can make a deal please. |
|
| Author: | Shane Neifer [ Mon Oct 15, 2007 1:16 am ] |
| Post subject: | |
Jim, I would interested in one also and can either pay you or make you a radius dish of your desired radius. I can also trade for something else. Just let me know! Thanks Shane |
|
| Author: | Don A [ Mon Oct 15, 2007 3:29 am ] |
| Post subject: | |
Jim, any particular wood you are looking for? |
|
| Author: | Rod True [ Mon Oct 15, 2007 3:48 am ] |
| Post subject: | |
Jim, I'm going to back out of my offer. I made a deal on another pump. I'm sure someone else will pic it up. |
|
| Author: | Rod True [ Mon Oct 15, 2007 3:49 am ] |
| Post subject: | |
Jim, I'm going to back out of my offer. I made a deal on another pump. I'm sure someone else will pick it up. |
|
| Author: | dgalas [ Mon Oct 15, 2007 4:31 am ] |
| Post subject: | |
Hey Jim, I have curly cherry, Sycamore, Padauk, Wenge, and more. Let me know what you're looking for. Cheers, -Dave |
|
| Author: | JRHall [ Mon Oct 15, 2007 6:52 am ] |
| Post subject: | |
PMs sent to everyone so far. Thanks for the responses Jim |
|
| Author: | Bob Garrish [ Mon Oct 15, 2007 8:24 am ] |
| Post subject: | |
I can saw up BS sets in padouk and black limba, or I can make you an acrylic radius dish. Also, you can just check out my site if there's anything on there you might prefer instead. |
|
| Author: | BOBP [ Tue Oct 16, 2007 3:33 am ] |
| Post subject: | |
Jim qm2 is yours pick me out a nice pump |
|
| Author: | JRHall [ Fri Oct 19, 2007 6:04 am ] |
| Post subject: | |
All the promised pumps have been shipped. Thanks to everyone so far!  Jim Hall |
|
| Author: | Brock Poling [ Sat Oct 20, 2007 1:10 pm ] |
| Post subject: | |
Hey... Can you either repost or mail me a picture of those vac pumps again? I want to see how you had them hooked up. I think I have this right, but I want to double check. :-) Thanks again. I hope you are enjoying the MBW. :-) |
|
| Author: | LanceK [ Sun Oct 21, 2007 12:05 am ] |
| Post subject: | |
What pumps? |
|
| Author: | JRHall [ Sun Oct 21, 2007 11:30 am ] |
| Post subject: | |
[QUOTE=Brock Poling] Hey... Can you either repost or mail me a picture of those vac pumps again? I want to see how you had them hooked up. I think I have this right, but I want to double check. :-) Thanks again. I hope you are enjoying the MBW. :-) [/QUOTE] The wood is rite purrrrdddy! As you could see, I had to do a little disassembly to fit 2 pumps in one flat rate box.   I found a couple more pumps of the vacuum pumps, if anyone else is interested. Industrial quality, vane type from an OSHA air monitoring system. Trade for wood or other lutherie stuff. Jim Hall |
|
| Author: | Brock Poling [ Sun Oct 21, 2007 12:15 pm ] |
| Post subject: | |
set of cuban mahogany for both? or... how about a set of medium figured koa? or... 2 euro tops? |
|
| Author: | Bill Greene [ Sun Oct 21, 2007 12:54 pm ] |
| Post subject: | |
Jim, if you don't work a trade with Brock, I'd be interested in one of the pumps. Could you post the price, what it will pull, etc. Thanks. Bill |
|
| Author: | Bill Greene [ Sun Oct 21, 2007 12:56 pm ] |
| Post subject: | |
Ooops, I apologize...looks like you're only wanting to trade. Understood - I should have read the entire thread. Bill |
|
| Author: | LanceK [ Mon Oct 22, 2007 12:02 am ] |
| Post subject: | |
Jim, if you have any left, id be happy to swap a set of flamed eucalyptus? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|