***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 10:04 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
BTucker
 Post subject:
PostPosted: Sun Oct 07, 2007 6:46 am 
Offline
Mahogany
Mahogany

Joined: Fri Sep 28, 2007 2:09 am
Posts: 59
Location: United States

Happy Weekend Y'all!  Gotta question:


I am thinking about putting a curly maple or curly koa binding on my next Indian Rosewood guitar.  I have noticed that Z-poxy tends to bring out the red resin in the rosewood.  It has never been a problem in the past because I have been using ivoroid bindings, and it is no problem to clean.  If I use wood bindings, though, I would expect to see some staining from the rosewood leaching resin via the Z-poxy.  I was wondering what some of you guys do to combat this, or does the wood binding scrape clean as easily as the ivoroid?
Top
 Profile  
 
BTucker
 Post subject:
PostPosted: Sun Oct 07, 2007 6:49 am 
Offline
Mahogany
Mahogany

Joined: Fri Sep 28, 2007 2:09 am
Posts: 59
Location: United States
Oh, I guess I should add that I am not worried about the color of the Z-Poxy itself, just the resin from the rosewood bleeding over....I see where that missing edit button y'all keep talking about could come in handy!
Top
 Profile  
 
billm
 Post subject:
PostPosted: Sun Oct 07, 2007 9:35 am 
Offline
Mahogany
Mahogany

Joined: Sat Oct 06, 2007 3:30 am
Posts: 97
Location: United States
First name: Bill
Last Name: Mansfield
City: El Dorado Hills
State: CA
Country: USA
Focus: Build
Status: Amateur

Just finished a guitar with EIR, curly maple bindings, and used Z-poxy.  Didn't see bleeding, the Z-poxy did change the tone of the maple slightly.  Take a look:


http://i139.photobucket.com/albums/q319/wmansfield/IMG_1949. jpg?t=1191795847


http://i139.photobucket.com/albums/q319/wmansfield/IMG_1951. jpg?t=1191795983


 
Top
 Profile  
 
BTucker
 Post subject:
PostPosted: Sun Oct 07, 2007 10:33 am 
Offline
Mahogany
Mahogany

Joined: Fri Sep 28, 2007 2:09 am
Posts: 59
Location: United States

Nice!  That's kind of what I am looking for.  Did you cut the first coat of poxy with any alcohol?  What I have been doing is cutting the first coat to get a good partial fill, then cutting the last coat less.  I think it is the opposite of what a lot of people here do, but it seems to work better for me as far as getting a good fill.  I'm getting quite a bit of bleeding onto the ivoroid though.  The alcohol in the first coat may be why I get the bleeding of the rosewood.  It's not an issue with the ivoroid, because it's easy to clean off, but I was concerned about any issues with wood bindings.  I also noticed that I get more disoloration if I move the poxy around too much.
Top
 Profile  
 
billm
 Post subject:
PostPosted: Sun Oct 07, 2007 11:22 am 
Offline
Mahogany
Mahogany

Joined: Sat Oct 06, 2007 3:30 am
Posts: 97
Location: United States
First name: Bill
Last Name: Mansfield
City: El Dorado Hills
State: CA
Country: USA
Focus: Build
Status: Amateur

Well - first, don't count me as an expert.  This was my second build, first time using Z-poxy (or epoxy at all).


First coats were not diluted, scraped them with an old plastic card (ID or ATM or something).  Wiped on the diluted coat last, roughly 50/50.


For what it's worth, this is what I had halfway through the process -


http://i139.photobucket.com/albums/q319/wmansfield/IMG_1943. jpg?t=1191802405
Top
 Profile  
 
billm
 Post subject:
PostPosted: Sun Oct 07, 2007 2:51 pm 
Offline
Mahogany
Mahogany

Joined: Sat Oct 06, 2007 3:30 am
Posts: 97
Location: United States
First name: Bill
Last Name: Mansfield
City: El Dorado Hills
State: CA
Country: USA
Focus: Build
Status: Amateur
Thanks Todd!  Yeah, happy accident for me then, putting those together.  Was pretty pleased with the result.  - Bill
Top
 Profile  
 
BTucker
 Post subject:
PostPosted: Mon Oct 08, 2007 3:07 am 
Offline
Mahogany
Mahogany

Joined: Fri Sep 28, 2007 2:09 am
Posts: 59
Location: United States
[QUOTE=billm]

Well - first, don't count me as an expert.  This was my second build, first time using Z-poxy (or epoxy at all).


First coats were not diluted, scraped them with an old plastic card (ID or ATM or something).  Wiped on the diluted coat last, roughly 50/50.


For what it's worth, this is what I had halfway through the process -


http://i139.photobucket.com/albums/q319/wmansfield/IMG_1943. jpg?t=1191802405


[/QUOTE]


BINGO!  That's exactly what I was looking for.  Bill, that thing is beautiful!
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Mon Oct 08, 2007 6:36 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
As Todd said, Zpoxy is thin as is no need to do a wipe coat to start.

Many of us sand back to wood after the fill has cured leaving the zpoxy only in the pores. Then we cut the Zpoxy either 50/50 with alcohol or 60 alcohol/40 Zpoxy as I do just to wet the wood but without leaving a noticeable film thickness. This is only to pop the color.

I have had some oily woods that did want to transfer color during the squeegee-on process of the Zpoxy. I seal the top and light colored bindings and purfling with shellac using a fine artist brush on the purfings prior to pore filling to avoid color transfer issues, but only when the back and side wood is a bleeder. The problem is not the Zpoxy it is the colored oils of the wood.
Top
 Profile  
 
billm
 Post subject:
PostPosted: Mon Oct 08, 2007 11:43 am 
Offline
Mahogany
Mahogany

Joined: Sat Oct 06, 2007 3:30 am
Posts: 97
Location: United States
First name: Bill
Last Name: Mansfield
City: El Dorado Hills
State: CA
Country: USA
Focus: Build
Status: Amateur

[QUOTE=BTucker]BINGO!  That's exactly what I was looking for.  Bill, that thing is beautiful![/QUOTE]


Thank you!  I appreciate it!  - Bill
Top
 Profile  
 
BTucker
 Post subject:
PostPosted: Tue Oct 09, 2007 12:44 pm 
Offline
Mahogany
Mahogany

Joined: Fri Sep 28, 2007 2:09 am
Posts: 59
Location: United States
Well, maybe the next guitar...I suggested it to the customer as a no extra cost option and he wants to stick with traditional ivoroid.  Oh well, maybe I'll just build another one for myself.  I need an updated demo anyway.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com