Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Any interest in a Gurian group buy?
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=13863		 Page 1 of 1
Author:  James Orr [ Tue Oct 02, 2007 5:47 pm ]
Post subject: 
Sometime this month I'm going to place an order with Gurian and thought I'd see if there was interest in making it a group buy. I thought people would be particularly interested in bridge pins after the recent discussion.

Their minimum order is $200, and they sell bridge pins by the gross (144) or half gross (72). These are the
prices per gross.

I'll be getting two purfling designs and would like to know if anyone wants to split them up with me. There are definitely enough to do that. It could be a good chance to get some of your own if there's a layup you've been wanting that falls under the $200 minimum. You have to order by the layup, so no partial layups. You can figure out how many are in a layup by checking their purfling designer. If someone wants to split mine with me, I'm ordering some variation of the following (not totally sure on the layer thicknesses)

black/red/black, .010"/.015"/.010" @ 34.5" long & .060" wide (tall).
- 85 strips per layup @ $.73 per strip


rosewood/pear/rosewood, .024"/.024"/.024" @ 34.5" long & .060" wide (tall).
- 87 strips per layup @ $.94 per strip
- This is the design I'm not sure about. I want a value darker than maple that won't get lost b/w rosewood.

Just thought I'd throw the idea out there.

   

Author:  Allen McFarlen [ Tue Oct 02, 2007 7:21 pm ]
Post subject: 
Count me in. I'm interested in a 1/2 gross of ebony bridge pins and 1/2 gross of rosewood bridge pins.
Author:  Rod True [ Tue Oct 02, 2007 7:37 pm ]
Post subject: 
James I would be interested in a half gross of ebony bridge pins (plain, no dot). Anyone want to get some end pins as well (ebony), I'd only need a dozen myself and if Michael will only sell them in the 1/2 gross we'd need 6 people for that. (is that ok James?)

I would also be interested in some of the first purfling scheme, a dozen strips.
Author:  David R White [ Tue Oct 02, 2007 11:51 pm ]
Post subject: 
James, I had posted that question in another thread, and had 3 responses. I have been told the Gurian web pricing is not up to date, and that their standard bridge pins are slotted - I'm waiting for an answer from them on that.

Anyway, I am interested in this one way or another, I'll keep in touch.
Author:  Brock Poling [ Wed Oct 03, 2007 1:30 am ]
Post subject: 

I would be interested in some of those rosewood/pear/rosewood purfs.

How many will you have?

Author:  James Orr [ Wed Oct 03, 2007 3:44 am ]
Post subject: 
Rod, I'm in for some of the plain ebony bridge and end pins as well. I
didn't see a price for the end pins, but I'll pick up the other half gross of
the bridge pins.

David, today is the day I give myself off from school work and sub-
teaching, so I'll give them a call to find out about pricing and the bridge
pins.

Brock, I'm not sure how many layups to order. Someone else PM'd me
asking for some. I'd like at least half of a layup, which would give me
enough for 12 guitars. I'm flexible on the numbers.

Cool. I'm glad there's interest!
Author:  James Orr [ Wed Oct 03, 2007 3:45 am ]
Post subject: 
Why don't you guys put down how many strips of which purfling you'd
like. It will be easier to come up with numbers that way.
Author:  vachterm [ Wed Oct 03, 2007 3:59 am ]
Post subject: 
James,
i'd gladly take the other half of your layup.
Author:  peterm [ Wed Oct 03, 2007 4:02 am ]
Post subject: 
I would be interested too in the rosewood/pear purfs...
Author:  psl53 [ Wed Oct 03, 2007 4:40 am ]
Post subject: 

I'd be interested in 1/4 gross ebony bride pins and 1/4 gross rosewood bridge pins and 12 strips of RW/P/RW and maybe the same amount of some herringbone.


Thanks, Let me know if we should do this side band.


Peter L
Author:  James Orr [ Wed Oct 03, 2007 5:31 am ]
Post subject: 
Ok, I just got off the phone with Gurian.

Unslotted 3 degree bridge pins are about 10% more than the current
prices on the website for slotted pins.

The black/red/black is $.082 per strip.

The rosewood/pear/rosewood is $1.03 per strip. They can sand each
layer to .020" rather than the .024" listed, which I would prefer.

They're also able to do cherry. Does anyone know if cherry and/or pear
look golden under finish? Or do they go towards the tans and browns?
Author:  Bill Greene [ Wed Oct 03, 2007 7:14 am ]
Post subject: 
James:

I'm interested in 3-degree unslotted pins too, ebony. What is the price of a quarter gross of pins? That's what I'd be interested in. Thanks.

Bill
Author:  Brock Poling [ Wed Oct 03, 2007 12:13 pm ]
Post subject: 
[QUOTE=James Orr] Ok, I just got off the phone with Gurian.

Unslotted 3 degree bridge pins are about 10% more than the current
prices on the website for slotted pins.

The black/red/black is $.082 per strip.

The rosewood/pear/rosewood is $1.03 per strip. They can sand each
layer to .020" rather than the .024" listed, which I would prefer.

They're also able to do cherry. Does anyone know if cherry and/or pear
look golden under finish? Or do they go towards the tans and browns? [/QUOTE]


I would be into 50 or so of the rosewood pear rosewood
Author:  James Ringelspaugh [ Wed Oct 03, 2007 12:59 pm ]
Post subject: 
I'm interested in some B/Red/B purflings. A dozen or two would be ideal, but I can buy more if need be.

I would also like a dozen rosewood/pear/rosewood or rosewood/cherry/rosewood.

Here's a picture of cherry binding next to wenge to give you some idea:

Author:  Alain Lambert [ Wed Oct 03, 2007 1:04 pm ]
Post subject: 
I would take a half gross of Ebony unslotted pins
and a dozen of the rosewood/pear/rosewood.
Author:  Allen McFarlen [ Wed Oct 03, 2007 7:04 pm ]
Post subject: 
I'd also be in for some end pins besides the 1/2 gross each of the un-slotted ebony and rosewood pins that I first posted about. 
Author:  Dave Anderson [ Thu Oct 04, 2007 12:06 am ]
Post subject: 
Would anyone like to split a half gross of ebony unslotted
3*, with white mop dots ?? That would be 36 pins each - enough for 6 guitars @ about $ 22.oo bucks. Sounds good to me!
Author:  Parames B [ Thu Oct 04, 2007 3:19 am ]
Post subject: 
I'd be in for;

1/2 gross Plain unslotted 3-degree Rosewood bridge pins
1/2 gross Plain unslotted 3-degree Ebony bridge pins

Thanks.
Author:  Dave Rickard [ Thu Oct 04, 2007 5:37 am ]
Post subject: 
[QUOTE=DaveAndy] Would anyone like to split a half gross of ebony unslotted
3*, with white mop dots ?? That would be 36 pins each - enough for 6 guitars @ about $ 22.oo bucks. Sounds good to me! [/QUOTE]

Sounds good to me too.
Author:  James Orr [ Thu Oct 04, 2007 5:49 am ]
Post subject: 
Cool. Keep posting what you'd like. I'll finalize things in a week, at which
time I'll add up how many which items are being requested and figure out
how many layups and grosses of each need to be ordered in order to get
everyone what they want.
Author:  blindreality [ Fri Oct 05, 2007 5:00 am ]
Post subject: 
I'm interested in a 1/2 gross of Ebony and a 1/2 gross of rosewood bridge pins.
Author:  David R White [ Fri Oct 05, 2007 10:23 am ]
Post subject: 
James, I'm interested in:

1/2 gross 3 degree unslotted ebony bridge pins
1/2 gross 3 degree unslotted roseweood bridge pins
1/2 gross 3 degree unslotted cocobolo bridge pins

1 layup of black fiber purfling, .08x.03x34.5"
1 layup of white fiber purfling, .08x.03x34.5"

If anyone wants to split the purfling with me but make it 64" in length I would prefer that.

...and yes they make cocobolo pins, the price is $47.41/gross.

If there's anything I can do to help with the workload let me know.
Author:  Brook Moore [ Fri Oct 05, 2007 11:50 am ]
Post subject: 
I would like to go in for some of the black/red/black purfling. I would take
as much as you want to share from the layup. I would prefer the 64" length,
but would be happy with the standard.

Thanks!

Brook Moore
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/