| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Newest tenor uke in koa/sitka http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=13850 |
Page 1 of 1 |
| Author: | Ricardo [ Mon Oct 01, 2007 9:01 am ] |
| Post subject: | |
Here's my latest effort. A tenor uke with sitka spruce top, koa sides and back. Binding is ebony. Inlay is pua abalone except for logo which is white MOP and yellow MOP hibiscus. This one features a battery-less MISI Acoustic Trio undersaddle pickup. For some reason string one is not amplified as much as the others. If anyone knows why I'd like to hear from them.     |
|
| Author: | LuthierSupplier [ Mon Oct 01, 2007 11:12 am ] |
| Post subject: | |
Just beautiful! I love everything about it! Congrats on a real beauty. How many have you built? This better not be #1 or I quit! Tracy |
|
| Author: | Ricardo [ Mon Oct 01, 2007 11:16 am ] |
| Post subject: | |
Tracy relax, its number 2. Regards Rich |
|
| Author: | WaddyThomson [ Mon Oct 01, 2007 12:30 pm ] |
| Post subject: | |
That is a great looking Uke. I really like it. Everything is perfect, in my opinion. Except, maybe, that first string thing. |
|
| Author: | Steve Kinnaird [ Mon Oct 01, 2007 2:38 pm ] |
| Post subject: | |
She's a beaut! And the uke ain't bad, either. Steve |
|
| Author: | Allen McFarlen [ Mon Oct 01, 2007 6:32 pm ] |
| Post subject: | |
I like that a lot. The whole instrument is elegant and with just the right amount of Bling. |
|
| Author: | Dave White [ Mon Oct 01, 2007 7:43 pm ] |
| Post subject: | |
Rich, That's gorgeous - beautifully put together. 
Does the spruce top give a very different sound than an all koa uke? I'd love to hear a soundclip. Are the tuners mini Gotohs? I notice that LMI does Gotoh uke tuners that look interesting. I still have making a uke on my "radar" and am getting very tempted by the harp-ukuleles like these. I'm afraid I can't help much with the pick-up problems as I'm no expert and others here will be more help to you. It could be to do with proper contact over the full saddle length but I have read that sometimes if you use bone for the saddle, different densities along the saddle length can cause problems too. |
|
| Author: | WaddyThomson [ Tue Oct 02, 2007 12:47 am ] |
| Post subject: | |
I wish I could remember where I saw it last night, but I was watching television, and saw a report of a 911 call, where someone was reporting a vagrant playing a ukulele on the corner across from their house. Very disturbing behavior!  
|
|
| Author: | Ricardo [ Tue Oct 02, 2007 12:52 am ] |
| Post subject: | |
The first string thing kind of resolved itself - maybe it was my amp setting? Dave, the only other uke I built was an all walnut. This one is more responsive. Steve Grimes told me that he didn't like all koa guitars, because he thought that spruce tops produced much better sound. The tuners are mini Gotohs. My next one will feature open geared Gotohs which are a lot lighter, but a bit more expensive. You can get them for a decent price at the hanalima site. Rich |
|
| Author: | Bruce Dickey [ Tue Oct 02, 2007 1:14 am ] |
| Post subject: | |
I really like your ukulele. Did you saw out your pearl yourself? Comparing the two e's they appear slightly different which makes me think they weren't Cnc'd. Very nice inlay, the flower too. Reminds me of the hibiscus I saw all over Maui, and the one on my back deck yesterday. 
Congratulations on a fine instrument. |
|
| Author: | csmonty [ Tue Oct 02, 2007 1:18 am ] |
| Post subject: | |
Mmmm, love the koa w/ ebony binding look. Beautiful. Out of curiosity, how deep is the body at the end block? I haven't seen many tenor uke's, so that thing looks huge to me. As far as the pickup, my only thought was that of Dave's - and that's coupling. Certainly could be something else, that's just the first thing that popped into my head. |
|
| Author: | Dave Anderson [ Tue Oct 02, 2007 1:28 am ] |
| Post subject: | |
Very fine Uke Rich. Love that Koa !
|
|
| Author: | Ricardo [ Tue Oct 02, 2007 1:32 am ] |
| Post subject: | |
Bruce, I did the pearl cutting and inlay. Not my favorite part of luthiery and would gladly farm it out. Csmonty, the design is based on a Hanalima plan and is 3" deep at the the tail block. Actually the design calls for 2 3/4" at the head block going to 3" two inches aft of the waist and going back down to 2 3/4" at the tail. I just didn't like the look of the tail end so I left it at 3". I may try a Wickham plan, since I think proportions of many of the parts such as the fingerboard and bridge could be reduced. Thanks for your comments. Rich |
|
| Author: | James Orr [ Tue Oct 02, 2007 3:12 am ] |
| Post subject: | |
Rich, that's gorgeous. |
|
| Author: | Don Williams [ Tue Oct 02, 2007 4:07 am ] |
| Post subject: | |
Love it. |
|
| Author: | Philip Perdue [ Tue Oct 02, 2007 5:48 am ] |
| Post subject: | |
That is a very nice looking ukulele. You have done an excellent job. I really like your headstock and the choice of tuners to match the koa and the gold inlay. The bridge looks a bit hefty but I’m sure it will work fine. But I agree on the pinless pass through bridge for string attachment. I ‘m planning on the same pinless style on all my ukuleles. You might check Bob Gleason’s Pegasus Guitar and Ukulele site for ukulele plans. The plans are very reasonably priced and he has made a ton of ukuleles. I was thinking about trying some of his plans out in the future. Currently I’m sitting a real nice set of select Koa and great set of Curly Mango for future builds. The Mango really has a nice tap tone. My thought is to use some of Shane’s Lutz for the tops. That wood is pretty stiff and would give a lot of leeway in tuning. I would also like to build a Bubinga ukulele. My current guitar build is of Bubinga and it really has a great tap tone. I know that Hana Lima in now selling a Bubinga kit but I haven’t heard any reviews of completed projects. Philip |
|
| Author: | Ricardo [ Tue Oct 02, 2007 6:26 am ] |
| Post subject: | |
Konacat, I didn't see plans advertised on the Pegasus site. His koa sets seem to be reasonably priced. Thanks Rich |
|
| Author: | burbank [ Tue Oct 02, 2007 6:38 am ] |
| Post subject: | |
Purdy lil thing. |
|
| Author: | Ricardo [ Tue Oct 02, 2007 7:20 am ] |
| Post subject: | |
Hesh, Likeke is my name Richard in Hawaiian. I play slack key for Lei Mele a Hawaiian music group in the Seattle area. Thanks Rich |
|
| Author: | Todd Rose [ Tue Oct 02, 2007 8:11 am ] |
| Post subject: | |
Looks great, Rich. Is that tuned GCEA, with the G tuned a fifth above the C? What's the scale length? |
|
| Author: | burbank [ Tue Oct 02, 2007 8:13 am ] |
| Post subject: | |
[QUOTE=Ricardo] Hesh, Likeke is my name Richard in Hawaiian. I play slack key for Lei Mele a Hawaiian music group in the Seattle area. Thanks Rich [/QUOTE] Cool, Rich. Are you from the islands? |
|
| Author: | Philip Perdue [ Tue Oct 02, 2007 8:19 am ] |
| Post subject: | |
Rich, You really need to look around from site directory on Bob's site but here ia link to his Builders and Repair Items. He has a lot of good stuff and offers a great deal of options along with some servicing. I have a feeling that anything purchased from Bob would be a good product.Pegasus Guitar and Ukulele Philip |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|