Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

It’s the simple things... freud blade
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=13433		 Page 1 of 1
Author:  Bruce Dickey [ Wed Aug 29, 2007 2:56 am ]
Post subject: 
Today, I peeled a new blade out of it's package, a Freud Diablo 7 1/4 inch framing blade with 24 carbide teeth. Got it off Amazon.com.

This blade was recommended by an olfer way back when.

Back then, I ran out and bought what I could find. A Freud Remodeling carbide blade 7 1/4 for use on my table saw. IT had 14 teeth and stated thin kerf.

The idea was a thin kerf blade to keep from eating up precious real estate when cutting braces.

While the remodeling blade states thin kerf it is actually .095". The diablo falls in at a mere .055". A difference worth noting.

It's also easy to see the differences in the two blades, the remodel blade is actually tilted back from the radius say ten degrees. The Diablo however had a forward tilt of say 20 degrees, much more agressive. Both have the anti-kickback knob following the tooth.

Just wanted to say, I had the wrong blade and that the Diablo feels great in hand, can't wait to use it.

DIABLO isn't that Spanish for Devil?   
Author:  Bobc [ Wed Aug 29, 2007 3:11 am ]
Post subject: 
Bruce that's the Grumpy guy's favorite blade. He's been recommending it for a long time.
Author:  letseatpaste [ Wed Aug 29, 2007 3:41 am ]
Post subject: 
Yeah, I picked up one from Home Depot after Grumpy raved about it. Doesn't feel right buying such a cheap blade till you actually use it. Nice smooth cut.
Author:  Bill Greene [ Wed Aug 29, 2007 4:15 am ]
Post subject: 
Hmmm...I'm in need of a new blade. Might go check it out. I remember Grumpy saying this now that you mention it. Thanks for the reminder.

Author:  Bruce Dickey [ Wed Aug 29, 2007 4:29 am ]
Post subject: 
Yeah it was Grumpio that reccomended it.

I was just shocked at how much thinner it felt than the other Freud. Cuts like the devil.
Author:  Larry Davis [ Wed Aug 29, 2007 7:50 am ]
Post subject: 
[QUOTE=Bruce Dickey] Yeah it was Grumpio that reccomended it. [/QUOTE]

Howard?
Author:  Bobc [ Wed Aug 29, 2007 8:18 am ]
Post subject: 
Mario
Author:  Shane Neifer [ Wed Aug 29, 2007 8:21 am ]
Post subject: 
Not certain, but didn't Mario use the 40 tooth Diablo's? I have both...

Shane
Author:  letseatpaste [ Wed Aug 29, 2007 8:27 am ]
Post subject: 
I think 40 is what I was using, but I'm not home to check.
Author:  Bruce Dickey [ Wed Aug 29, 2007 8:40 am ]
Post subject: 
Nah, he was using the cheapos.

This 24 tooth .055" Diablo Freud cost 9 bucks and change. I had something else in the works at Amazon, so I included that blade since I could never find it locally. We live in Rural Arkansas, the sticks and even though we have a Lowe's and WalMart, no diablos....

Author:  Dave Rector [ Wed Aug 29, 2007 8:51 am ]
Post subject: 
I have both and the 40 tooth stays on my tablesaw most of the time. It definately gives a smoother cut than the 24 tooth blade does.

Thanks again Mario!!!
Author:  Dave Rector [ Wed Aug 29, 2007 8:54 am ]
Post subject: 
Oh yeah, it's only a couple bucks more for the 40 tooth blade. Well worth it in my opinion.
Author:  letseatpaste [ Wed Aug 29, 2007 9:02 am ]
Post subject: 
$14.30 is still cheap in my book... I think I paid less than that at Home Depot.

amazon link
Author:  Arnt Rian [ Wed Aug 29, 2007 9:15 am ]
Post subject: 
I use the 40 tooth narrow kerf Diablo too. My saw is an older British Wadkin cabinet saw, similar to a Unisaw, with a 3hp / 3 phase motor. I upgraded it with a professional Biesmeyer fence, tuned it pretty much like this, and now with the Diablo blade this saw is a true joy to use. Recommended!
Author:  grumpy [ Wed Aug 29, 2007 12:59 pm ]
Post subject: 
I keep both the 24 and 40 on hand. 

Great little blades, eh?
Author:  DP LaPlante [ Wed Aug 29, 2007 1:08 pm ]
Post subject: 
It's the best blade for this work I've found as well. The thin kerf wins the day......cheap too!
Author:  Terry Stowell [ Wed Aug 29, 2007 1:17 pm ]
Post subject: 
Love my Diablo 40 tooth!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/