Nice Tutorial, Chris. I may have to make a plane now, to satisfy my curiosity. Good job.
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Micro Plane Building; A Tutorial http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=13157 |
Page 1 of 1 |
| Author: | WaddyThomson [ Fri Aug 10, 2007 2:14 pm ] |
| Post subject: | |
Nice Tutorial, Chris. I may have to make a plane now, to satisfy my curiosity. Good job.
|
|
| Author: | BlackHeart [ Fri Aug 10, 2007 4:36 pm ] |
| Post subject: | |
What about the blades? 
|
|
| Author: | Chansen [ Fri Aug 10, 2007 6:53 pm ] |
| Post subject: | |
Thanks Chris! I really like the look of these planes - hopefully I will get a chance to build one in the near future. |
|
| Author: | Jim Kirby [ Fri Aug 10, 2007 10:33 pm ] |
| Post subject: | |
Chris - Thanks! I agree with Waddy - it makes me want to rush out to the garage and dive into the scrap pile (although I know there's no lignum in there.)
Any pointers or experience with curved soles, along, across or uniform radius? Jim |
|
| Author: | Alain Lambert [ Sat Aug 11, 2007 2:08 am ] |
| Post subject: | |
I made these a while ago. The most dificult part is putting the pin for the wedge at the right place and equal each side. Mine do not have a wedge but a screw adjustment. 
For the blade, I used an old spokeshave blade (too short for the spokeshave)cut in half with a cuting disc |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|