Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/
Pinging Mr Woolson http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=12931	Page 1 of 1

---

Author:	Michael Dale Payne [ Mon Jul 23, 2007 6:17 am ]
Post subject:
Paul SuperSoft is originally designed for veneer use. So I assume the directions are written accordingly. What do I do different than stated on the instructions as it pertains to sides at .08-.09"

---

Author:	WaddyThomson [ Mon Jul 23, 2007 6:22 am ]
Post subject:
Inquiring minds want to know!   I'm interested too.

---

Author:	WaddyThomson [ Mon Jul 23, 2007 6:23 am ]
Post subject:
Come to think of it, Michael, didn't I see a post a few weeks ago about that in one of the bending discussions. I'll go look for it.

---

Author:	Pwoolson [ Mon Jul 23, 2007 6:29 am ]
Post subject:
Spray it on good and heave. LET IT DRY COMPLETELY!!! I made the mastake once of using it as I would the spritz and put it in the bender wet. It made the most horrible splotches and stains that didn't sand out. Once dry, you can respritz with water and won't have any problems. I think there's glycerine in it has to absorb into the pores. I haven't done and apples to apples test to see if it really makes a difference but I've bent some pretty insane quilt into a 2" cutaway and didn't even have lifting.

---

Author:	Pwoolson [ Mon Jul 23, 2007 6:39 am ]
Post subject:
BTW: I wouldn't consider myself an authority on the subject. This method has worked for me which is why I'm sharing it with you. Maybe we should wait for the Voice Of Experience to chime in and tell us how it SHOULD be done.

---

Author:	WaddyThomson [ Mon Jul 23, 2007 6:45 am ]
Post subject:
Here is one discussion:  Archive 1 Here is another:  Archive 2 Neither is the one I was thinking about, but they work.

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/