Bob is right, and for the record......not all sets on ebay is cheap
. If bob doesn't have something for you give me a call on my wood line...757 392 0130 ...Bob's mahogany should do you well though.
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| In search of high moot back/sides http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10102&t=1108 |
Page 1 of 1 |
| Author: | JeremyC [ Tue Feb 22, 2005 3:04 am ] |
| Post subject: | |
(That’s right "moot" not "zoot". The polar opposite of zoot is what I’m looking for.) Greetings all, I have lurked for a long while and have decided that I really should participate. I’ve started planning for my second instrument and have decided that while I will purchase a decent top I want a somewhat inexpensive set of back & sides. I really don’t even care if they're matched as this is a prototype instrument and I’m not really sure how it will work out. The real question here is: Does anyone know of anyone that sells mismatched/fugly sides and backs? Thanks in advance, Jeremy |
|
| Author: | Brock Poling [ Tue Feb 22, 2005 3:06 am ] |
| Post subject: | |
Allied has a low grade of rosewood that is very inexpensive, and there are always lots of cheap sets on ebay to be found. |
|
| Author: | LanceK [ Tue Feb 22, 2005 3:08 am ] |
| Post subject: | |
I bet one of the wood sponsors here will have something for ya --- Welcome Jeremy.. |
|
| Author: | Mattia Valente [ Tue Feb 22, 2005 5:42 am ] |
| Post subject: | |
Cheapest I've seen is the African mahoganies Maderas Barber over in Spain has, with low grade rosewoods for not much more. Sapele sets (no grading, so I'm assuming plainly quartered, simple sets) for 12-13 euros, Khaya for about the same, Padauk and honduran in there, all under the 25 mark. Don't think it gets any cheaper than that. |
|
| Author: | Steve Kinnaird [ Tue Feb 22, 2005 5:58 am ] |
| Post subject: | |
Hi, Jeremy... I mean, Howdy! Talk to the "Moot" man, our own BobC. (Or should that be CocB, following your logic?) He cuts what he finds, so if you tell him you want something plain, he might welcome the chance to buy some inexpensive wood for a change. What say, Bob? |
|
| Author: | Don Williams [ Tue Feb 22, 2005 8:50 am ] |
| Post subject: | |
some plain mahogany should be cheap enough. Check with Euphonon...he sometimes has mahogany sets for $15 or so. |
|
| Author: | Bobc [ Tue Feb 22, 2005 12:52 pm ] |
| Post subject: | |
Jeremy I do have some plain mahogany sets pretty cheap. I also have mismatched sets. However I wouldn't waste my time building a guitar with mismatched wood that is cheap. Labor is still the same no matter what wood you build with. |
|
| Author: | BruceH [ Tue Feb 22, 2005 1:32 pm ] |
| Post subject: | |
Jeremy, I'm with Bob on this one. What's the price difference between a cheap mismatched set and an inexpensive set of matched mahogany? If Bob can't fix you up, AC Woods (another forum sponsor)has sapeli for $32 a set. Once you've invested all that time and find that your experiment turned out great, you'll kick yourself for "saving" $15. This is one lesson I've learned the lesson the hard way. BruceH |
|
| Author: | Dickey [ Tue Feb 22, 2005 1:34 pm ] |
| Post subject: | |
Bob is right. The wood is secondary to what you do. But if you want to make something that doesn't match it's okay as a learning and cost saving effort. That said, let me say this: Most people who build a guitar, that have good basic skills, often amaze themselves at how good a guitar they build with no experience. So, back to Bob's point, get some good wood, and good wood and expensive needn't be synonymous. Mahogany and Sapele prices are absolutely a bargain. |
|
| Author: | Brian Hawkins [ Tue Feb 22, 2005 2:10 pm ] |
| Post subject: | |
Bob is right, and for the record......not all sets on ebay is cheap . If bob doesn't have something for you give me a call on my wood line...757 392 0130 ...Bob's mahogany should do you well though.
|
|
| Author: | Brock Poling [ Tue Feb 22, 2005 2:14 pm ] |
| Post subject: | |
Sure not ALL sets are cheap... and you guys do a very good job supplying us, but if you know going in that the wood is likely to be throw away I understand the urge to go really cheap. I just saw a decent set of walnut, nothing special, but not flawed either go for $25 today. That is pretty cheap in my book. |
|
| Author: | Brian Hawkins [ Tue Feb 22, 2005 2:40 pm ] |
| Post subject: | |
I was just playin around BP...You are right on all points. I do think that the tendency to build with more care and patience is there when the "investment" is made, be it on a smaller or larger scale. |
|
| Author: | Dickey [ Tue Feb 22, 2005 3:20 pm ] |
| Post subject: | |
Hey Jeremy, I see you are new, welcome to the OLF. Old Luthier Farts (an "f" word for sure, and synonymous with curmudgeons) |
|
| Author: | Colin S [ Tue Feb 22, 2005 9:16 pm ] |
| Post subject: | |
Hey, and you know that plain mahogany will still make a great sounding guitar! Colin |
|
| Author: | Brian Hawkins [ Tue Feb 22, 2005 10:41 pm ] |
| Post subject: | |
[QUOTE=Colin S] Hey, and you know that plain mahogany will still make a great sounding guitar! Colin[/QUOTE] Easy to work and easy on your tools also! 
|
|
| Author: | Brock Poling [ Wed Feb 23, 2005 8:24 am ] |
| Post subject: | |
But.... someday you might be crying the blues (or in Colin's case singing the blues...  ) if you waste a good set of Hondo on an experiment.
You know that stuff is going to shoot up in price when African becomes the only commercially available mahogany. |
|
| Author: | Brian Hawkins [ Wed Feb 23, 2005 3:10 pm ] |
| Post subject: | |
That is why I stash a set for every few that I cut. |
|
| Author: | JeremyC [ Thu Feb 24, 2005 2:02 am ] |
| Post subject: | |
Thanks for your advice. I have limited internet access and was absolutely dumbfounded as to the expedient responses from everyone. Thanks again. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|