***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 8:59 am


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
BruceHerrmann
 Post subject:
PostPosted: Sun Dec 02, 2007 8:45 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Nov 19, 2007 7:56 am
Posts: 225
Location: United States

Just found this locally, new blades, set up, the guy says he got an 8" so does not need this one.  220.00.  Does that seem fair or overpriced?  Seems like I've seen a lot of you guys use Delta jointers.  I'd appreciate you opinions.


Thanks


Bruce



_________________
Bruce Herrmann
"What lies behind us and what lies before us are tiny matters compared to what lies within us."
Top
 Profile  
 
FishtownMike
 Post subject:
PostPosted: Sun Dec 02, 2007 8:51 am 
Offline
Koa
Koa

Joined: Sat Aug 04, 2007 10:37 am
Posts: 590
Location: United States
First name: Michael
Last Name: Shaw
City: Phila
State: PA
Zip/Postal Code: 19125
Country: United States
Bruce i would recomend you try it out. i don't think the guy would have a problem with that if he's honest. delta does make good tools. especially the older delta machines. The price isn't bbad if it works fine. new 6 inch deltas are going for about $400.00.

_________________
Guitars, guitars and more guitars.
Top
 Profile  
 
BruceHerrmann
 Post subject:
PostPosted: Sun Dec 02, 2007 8:57 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Nov 19, 2007 7:56 am
Posts: 225
Location: United States

Thanks, good idea.  He said he made a jig for setting up the blades and would walk me through the set-up.  Seems like a good guy on the phone, we'll see.  Thanks again.


Bruce


_________________
Bruce Herrmann
"What lies behind us and what lies before us are tiny matters compared to what lies within us."
Top
 Profile  
 
Alain Lambert
 Post subject:
PostPosted: Sun Dec 02, 2007 10:13 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 14, 2006 12:41 pm
Posts: 317
Location: Trois-Rivieres
First name: Alain
Last Name: Lambert
City: Trois-Rivieres
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
The tables look short to me. How long are they? The longer the better.
I have a similar and the tables are 42" long total.
You need a 3/4HP motor at least .

The price is good, used 6" jointer are going around $300 around here.


Top
 Profile  
 
BruceHerrmann
 Post subject:
PostPosted: Sun Dec 02, 2007 10:23 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Nov 19, 2007 7:56 am
Posts: 225
Location: United States

This is a 32" table with a 1 hp motor.  Does the table length make it less likely to be useful?  I can see where a longer table could be a big benefit, small shop size in my case, might make the shorter table a plus but not at the expense of accuracy.....


_________________
Bruce Herrmann
"What lies behind us and what lies before us are tiny matters compared to what lies within us."
Top
 Profile  
 
Alain Lambert
 Post subject:
PostPosted: Sun Dec 02, 2007 10:38 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 14, 2006 12:41 pm
Posts: 317
Location: Trois-Rivieres
First name: Alain
Last Name: Lambert
City: Trois-Rivieres
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
For guitar work this is OK. Longer table make it easier to get straigth wood. But for short pieces ( 3-4 ft), it is OK
I have worked several years with a 4" jointer which had sort tables and I could managed.
Both tables are adjustable which is good.
Go for it!


Top
 Profile  
 
Don Williams
 Post subject:
PostPosted: Sun Dec 02, 2007 10:42 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
Watch your fingers....

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."
Top
 Profile  
 
David Collins
 Post subject:
PostPosted: Sun Dec 02, 2007 10:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060
That's a really short table. I suppose it depends on what you'll be joining on
it though. $220 seems steep to me for something like that, but I may be
basing that on the fact that most of those I see for sale are in such a sad
state of maintenance. If it's an old Rockwell Delta, and it really has been
trued up (which is usually the big if), and it has new blades than it may in
fact be a good deal. My old shopmate just sold his Powermatic 60A 8"
jointer for I think around $1300, and that was a great old machine.

Go check it out with, equipped with at least a good straight edge and
square. If it's set up well and you aren't joining any terribly long boards than
it may be a very good deal.

_________________
Eschew obfuscation, espouse elucidation.
Top
 Profile  
 
Blanchard
 Post subject:
PostPosted: Sun Dec 02, 2007 12:14 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jun 15, 2007 12:14 am
Posts: 332
Location: United States
I have the "long bed" version of that machine. It is a good solid machine. I did have some trouble with it though. I bought mine used in 1985 and after using it for a few years, and having a hard time getting good joints, I discovered that the tables were neither flat nor parallel. I managed to improve the situation by shimming the dovetail slides with shim stock and flattening the tables with a good straight edge and a belt sander (no kidding... took all day !) Now it is a great machine.

So.... just because it's an old Delta doesn't mean that it is straight and true. Iron casting have a bad habit of warping over time.

A good straight edge and a strong light can reveal tables that are out of whack. I would check it out carefully before buying.

Mark
Top
 Profile  
 
mgcain
 Post subject:
PostPosted: Sun Dec 02, 2007 12:17 pm 
Offline
Mahogany
Mahogany

Joined: Fri Nov 30, 2007 1:57 am
Posts: 97
Location: East Granby, CT
Just make sure the outfeed table is dead flat and the fence as well.  If so, that's a good price...
Top
 Profile  
 
BruceHerrmann
 Post subject:
PostPosted: Sun Dec 02, 2007 12:26 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Nov 19, 2007 7:56 am
Posts: 225
Location: United States

OK, great advice, I'll bring along a good straight edge to check things. It it checks out, I'll probably buy it, seems like a decent jointer for the price. Better photos when I see it.


Bruce


_________________
Bruce Herrmann
"What lies behind us and what lies before us are tiny matters compared to what lies within us."
Top
 Profile  
 
WaddyThomson
 Post subject:
PostPosted: Sun Dec 02, 2007 2:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Yeah, my son, who has his own cabinet making business, bought a Delta about 10 years ago, and after working to level and make the tables parallel, found out that they could not be adjusted enough, and had some warp in them.  He returned it and bought a Powermatic long bed for twice as much, but never had to look back.

I would guess, however, if this guy has been using this planer for a while, and is a competent woodworker, it probably does not have those problems.


_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Bruce Dickey
 Post subject:
PostPosted: Mon Dec 03, 2007 12:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
I bought an old Kalamazoo Atlas for $165, had it about ten years. Mine is a six, replaced the knives once and both bearings on the cutterhead. I wish these things were easier to set up, they are a bear.

Once done though, they are wonderful machines to have. Maybe it's just me, but I like the old heavy machines. I know some of the newer cutterheads have adjusting screws for blade height, not just the set screws that mine have. That's a definite improvement.

_________________
http://www.dickeyguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com