You may already know this but be careful with tightening the cosmo black washers. The coating can chip off which is a bad look. Ask me how I know.
Brad
Sent from my iPhone using Tapatalk Pro
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Need tuner http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=57116 |
Page 1 of 1 |
| Author: | Glen H [ Tue Jul 01, 2025 6:45 am ] |
| Post subject: | Need tuner |
Hello all, I know it is a long shot but I think I’ll ask anyway. I lost one washer that goes on a Gotoh 510 tuner. The one under the nut on the head plate. It is cosmo black. Would anyone have a spare tuner I could buy? All I need is the washer, but a tuner is fine. I’ve checked all the sources with no luck (Stewmac, Allparts, etc). Thanks in advance |
|
| Author: | J De Rocher [ Tue Jul 01, 2025 10:56 am ] |
| Post subject: | Re: Need tuner |
Philadelphia Luthier Tools and Supplies sells various Gotoh 510 tuners in cosmo black as singles. https://www.philadelphialuthiertools.com/ |
|
| Author: | phavriluk [ Tue Jul 01, 2025 3:02 pm ] |
| Post subject: | Re: Need tuner |
Glen H wrote: Hello all, I know it is a long shot but I think I’ll ask anyway. I lost one washer that goes on a Gotoh 510 tuner. The one under the nut on the head plate. It is cosmo black. Would anyone have a spare tuner I could buy? All I need is the washer, but a tuner is fine. I’ve checked all the sources with no luck (Stewmac, Allparts, etc). Thanks in advance Is there anything proprietary about that washer that would prevent substituting just about any black washer that came with any tuner? Tuner seem to standardize on 10MM internal diameters..... |
|
| Author: | Michaeldc [ Tue Jul 01, 2025 3:14 pm ] |
| Post subject: | Re: Need tuner |
phavriluk wrote: Glen H wrote: Hello all, I know it is a long shot but I think I’ll ask anyway. I lost one washer that goes on a Gotoh 510 tuner. The one under the nut on the head plate. It is cosmo black. Would anyone have a spare tuner I could buy? All I need is the washer, but a tuner is fine. I’ve checked all the sources with no luck (Stewmac, Allparts, etc). Thanks in advance Is there anything proprietary about that washer that would prevent substituting just about any black washer that came with any tuner? Tuner seem to standardize on 10MM internal diameters..... I think the washer for that application is actually 8mm. M |
|
| Author: | Chris Pile [ Tue Jul 01, 2025 4:03 pm ] |
| Post subject: | Re: Need tuner |
Check Squeebay or Treeverb.... |
|
| Author: | Ken Lewis [ Tue Jul 01, 2025 5:09 pm ] |
| Post subject: | Re: Need tuner |
Here you can purchase various individual tuners. I never dug around to check for 510s but pretty sure the washers and nuts are same size. If only need washer I would order this one. Fine folks to order from. British Columbia. https://edcofinewoods.com/products/goto ... ack-1-left |
|
| Author: | Colin North [ Tue Jul 01, 2025 5:27 pm ] |
| Post subject: | Re: Need tuner |
Michaeldc wrote: phavriluk wrote: Glen H wrote: Hello all, I know it is a long shot but I think I’ll ask anyway. I lost one washer that goes on a Gotoh 510 tuner. The one under the nut on the head plate. It is cosmo black. Would anyone have a spare tuner I could buy? All I need is the washer, but a tuner is fine. I’ve checked all the sources with no luck (Stewmac, Allparts, etc). Thanks in advance Is there anything proprietary about that washer that would prevent substituting just about any black washer that came with any tuner? Tuner seem to standardize on 10MM internal diameters..... I think the washer for that application is actually 8mm. M Me to, as well as +1 |
|
| Author: | Glen H [ Tue Jul 01, 2025 6:54 pm ] |
| Post subject: | Re: Need tuner |
Thanks to all! I was unfamiliar with any of these places. I just ordered one. Peter, it is cosmo black which isn’t black paint. I actually ordered a set of washers from Amazon that were black but it just stood out wrong. You all are the best! |
|
| Author: | bcombs510 [ Tue Jul 01, 2025 7:52 pm ] |
| Post subject: | Re: Need tuner |
You may already know this but be careful with tightening the cosmo black washers. The coating can chip off which is a bad look. Ask me how I know. Brad Sent from my iPhone using Tapatalk Pro |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|