| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Another plug for Stew Mac http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=56826 |
Page 1 of 1 |
| Author: | Brad Goodman [ Thu Oct 10, 2024 1:10 pm ] |
| Post subject: | Another plug for Stew Mac |
On one of my customers guitars that was about 3 years old a koa button on a set of Waverlys came loose. Not only did Stew Mac send a new set at no charge, but I requested a different set that was $42. more and said I would pay the difference, and they said no need to pay the difference. That's a class act! |
|
| Author: | Hesh [ Fri Oct 11, 2024 4:31 am ] |
| Post subject: | Re: Another plug for Stew Mac |
Very cool. I recently sent in about 15 nut files that I had used on thousands of guitars over the last decade and a half and they replaced them all and did so with a smile and class. The files last a very long time but we also cut light cured dental fillings that shorten the life of the files because the composite is so hard. I had a problem with a pedal I was building and StewMac resolved the problem with their excellent tech support and then sent me a new pedal kit. During the pandemic an amplifier cabinet that was part of an amp kit I was building had the studs misplaced and StewMac sent me a new cab and did not make me jump through hoops to return the old one. This week I emailed them on Monday because my third Ron Clone clone kit pedal that I was building, I give these away as gifts to friends, didn't work when I was finished. StewMac responded in less than 24 hours, had looked at my high res pic I sent and found I plugged the op amp chip into the socket backwards. Ten seconds later the pedal worked and I was a happy guy. Legendary customer service from StewMac. Also nice to see posts that are supportive of our industry, thanks Brad. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|