| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| How Do Hang Your Large Drawings? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=56737 |
Page 1 of 1 |
| Author: | Kbore [ Fri Aug 23, 2024 11:08 am ] |
| Post subject: | How Do Hang Your Large Drawings? |
I need to hang 4 or 5 large 36" wide build drawings and was hoping I could get some ideas on how to build a wall mounted hanger, similar to the one in the link. I don't have a single "plan". Of the three dreadnaught plans I have bought, (StewMac, LMI, Kinkaid) each one has crucial details missing, now added in pencil so I use them all. I'm heading to the printer to get copies made before I wear them out. This is the style that I would buy if I had unlimited funds- 36" hangers are extra and $$$ https://a.co/d/g9CODIr |
|
| Author: | CarlD [ Fri Aug 23, 2024 12:02 pm ] |
| Post subject: | Re: How Do Hang Your Large Drawings? |
I've got two 36" steel doors to my humidity controlled assembly room. so I stick them to the doors with Sonicare toothbrush magnets. |
|
| Author: | Darrel Friesen [ Fri Aug 23, 2024 2:11 pm ] |
| Post subject: | Re: How Do Hang Your Large Drawings? |
On construction sites we used to use survey lathe and large binder clips to hold D sized drawings and a plywood box with a mostly open front to hang the sticks of drawings. Not as elegant as the aluminum ones but just as effective. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|