Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

curly maple neck finish

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

phavriluk

Post subject: curly maple neck finish

Posted: Tue Jun 25, 2024 7:53 pm

Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1039
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur

This is my first maple neck. What's customary with maple - - - pore filler? Damfino.

Thanks!

_________________
Peter Havriluk

Top

Jim Watts

Post subject: Re: curly maple neck finish

Posted: Tue Jun 25, 2024 8:01 pm

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States

You don’t need a pore filler. If it’s got some figure some shellac or epoxy helps bring that out. Then finish as usual.

_________________
Jim Watts
http://jameswattsguitars.com

These users thanked the author Jim Watts for the post (total 3): Pmaj7 (Thu Jun 27, 2024 1:42 am) • phavriluk (Tue Jun 25, 2024 10:31 pm) • Kbore (Tue Jun 25, 2024 8:12 pm)

Top

kfish

Post subject: Re: curly maple neck finish

Posted: Wed Jun 26, 2024 3:21 pm

Contributing Member

Joined: Sun Jan 27, 2008 8:44 pm
Posts: 104
Location: Woodstock, Illinois
First name: Kent
Last Name: Fishburn
City: Woodstock
State: Illinois
Focus: Build
Status: Amateur

I have wiped on a coat of Z-Poxy and wiped off. Not for the pore fill but because Z-Poxy brings out the curl in maple. Then finished with normal finish.
Kent

These users thanked the author kfish for the post: Pmaj7 (Thu Jun 27, 2024 1:44 am)

Top

phavriluk

Post subject: Re: curly maple neck finish

Posted: Wed Jun 26, 2024 4:02 pm

Koa

kfish wrote:

I have wiped on a coat of Z-Poxy and wiped off. Not for the pore fill but because Z-Poxy brings out the curl in maple. Then finished with normal finish.
Kent

Thar's what I had in mind, and I've done that on other-species necks. This one has such dramatic figure; I want to emphasize it. Thanks!

_________________
Peter Havriluk

Top

profchris

Post subject: Re: curly maple neck finish

Posted: Thu Jun 27, 2024 9:22 am

Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 279
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur

If you have offcuts of the maple i'd make three test pieces using Z-poxy, shellac and boiled linseed oil. Each brings out flame but in slightly different ways, use whichever you like best!

Top

dofthesea

Post subject: Re: curly maple neck finish

Posted: Thu Jun 27, 2024 5:00 pm

Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 784
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur

Have you thought about an oil finish? it pops the grain and feels wonderful. I like true oil for Maple necks.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/

Top

phavriluk

Post subject: Re: curly maple neck finish

Posted: Fri Jun 28, 2024 10:13 pm

Koa

dofthesea wrote:

Have you thought about an oil finish? it pops the grain and feels wonderful. I like true oil for Maple necks.

Thanks for the suggestion. That ship sailed last night - - - wiped on Z-Poxy. Sure helped bring up the figure.

_________________
Peter Havriluk

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 44 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: