Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Inspection light
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=56403		 Page 1 of 1
Author:  bcombs510 [ Tue Feb 13, 2024 7:33 pm ]
Post subject:  Inspection light
A builder I follow on instagram @mustcreatethings (give them a follow) shared an inspection light design intended to be 3D printed. I’m into a lot of things but 3D printing is not one of them (yet).

Here is my adapted design for CNC. In true Brad fashion I bought enough of the mirrors and cork pads to make a dozen of them. I’m happy to send to any of my fellow OLFers who will pay the shipping. You would also need to buy the specific flashlight since the setup is friction fit into the plate. PM me.

Image

Image

Image

Image

Image

Here is a video of it in use:

https://youtube.com/shorts/lD1xV6_Hw00? ... 8PJSFAcBvI

Brad


Sent from my iPhone using Tapatalk Pro
Author:  J De Rocher [ Tue Feb 13, 2024 8:40 pm ]
Post subject:  Re: Inspection light
The audio alone makes me want one. Sending PM.
Author:  dofthesea [ Tue Feb 13, 2024 9:27 pm ]
Post subject:  Re: Inspection light
Dude I totally want one and will pay whatever you desire. lol Let me know
Author:  bcombs510 [ Tue Feb 13, 2024 9:52 pm ]
Post subject:  Re: Inspection light
dofthesea wrote:
Dude I totally want one and will pay whatever you desire. lol Let me know

Shoot me a PM and we’ll work it out!


Sent from my iPhone using Tapatalk Pro
Author:  Colin North [ Wed Feb 14, 2024 4:02 am ]
Post subject:  Re: Inspection light
Love the vid! Totally telesales.
Author:  Chris Pile [ Wed Feb 14, 2024 6:30 am ]
Post subject:  Re: Inspection light
That's genius, Brad.
Author:  bcombs510 [ Sun Feb 18, 2024 4:54 pm ]
Post subject:  Re: Inspection light
For the folks that PM’d me, I’m cutting these today. I picked up one of those fancy drag knife things for the CNC. :D

Image

Image

https://youtube.com/shorts/pNGgLJG4sP4? ... wi4xHat4Ob

Brad


Sent from my iPhone using Tapatalk Pro
Author:  mtracz [ Mon Feb 19, 2024 7:49 am ]
Post subject:  Re: Inspection light
Brad,

I dig your version of this and am stoked to see your interest here!
And good on you for offering to make them for fellow members.
Way to go!

_Mike
Author:  bcombs510 [ Mon Feb 19, 2024 9:43 am ]
Post subject:  Re: Inspection light
Thanks again for the inspiration! I’m learning a lot from you on instagram. It’s appreciated.


Sent from my iPhone using Tapatalk Pro
Author:  bcombs510 [ Tue Feb 27, 2024 6:53 pm ]
Post subject:  Re: Inspection light
Hi folks, I shipped these out today. I’ll PM you tracking. It’s coming USPS. Inside the box is a QR code to the light on Amazon and an assembly video. Or you can just click here - https://youtu.be/1EicN1ajrDI?si=f8Ib1SbSzaQpxu-K

Image

Each box has the two components for the base, two mirrors (a spare was included) and adhesive backed cork for the base.

Have fun!


Sent from my iPhone using Tapatalk Pro
Author:  J De Rocher [ Sun Mar 03, 2024 5:02 pm ]
Post subject:  Re: Inspection light
I assembled my Combs-o-matic Inspection Light™ today and here it is.

Thanks, Brad.

Attachment:
Inspection Light.jpg
Author:  bcombs510 [ Sun Mar 03, 2024 5:20 pm ]
Post subject:  Re: Inspection light
Awesome! :)


Sent from my iPhone using Tapatalk Pro
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/