Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

00 (x3) BWW
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=56081		 Page 1 of 1
Author:  Marcus [ Sat Nov 25, 2023 4:33 pm ]
Post subject:  00 (x3) BWW
Here are 3 00 guitars I finished this month. Details below!

#1
B&S: Red Maranti (This is a guess as I have no idea what the wood actually is)
Top: Cedar
Fretboard & Bridge: Macassar Ebony
Binding: Rocklite Ebano
Finish: EM6000

ImageImage
ImageImage
ImageImage
Image
Image
Image

Let me know what ya'll think!
Author:  Marcus [ Sat Nov 25, 2023 4:34 pm ]
Post subject:  Re: 00 (x3) BWW
#2
B&S: Mahogany
Top: Cedar
Fretboard & Bridge: Amazon Rosewood
Binding: Bubinga
Purfling: B/W Fiber with maple center
Finish: EM6000 (matte)

ImageImage
ImageImage
ImageImage
Image
Image
Image
Author:  Marcus [ Sat Nov 25, 2023 4:34 pm ]
Post subject:  Re: 00 (x3) BWW
#3
B&S: Black Walnut
Top: Sitka Spruce
Fretbkoard & Bridge: Indian Rosewood
Binding: Figured Koa
Purfling: Spalted Tamarind
Finish: EM6000

ImageImage
ImageImage
ImageImage
Image
Image
Author:  Pmaj7 [ Sat Nov 25, 2023 7:48 pm ]
Post subject:  Re: 00 (x3) BWW
Looking good Marcus!

Sent from my SM-N960U1 using Tapatalk
Author:  J De Rocher [ Sat Nov 25, 2023 8:48 pm ]
Post subject:  Re: 00 (x3) BWW
Somebody has been busy making gorgeous guitars. In addition to the cool details, I like your wood choices a lot.
Author:  SteveSmith [ Sat Nov 25, 2023 9:45 pm ]
Post subject:  Re: 00 (x3) BWW
Very nice guitars.


Steve
Author:  SteveSmith [ Sat Nov 25, 2023 9:45 pm ]
Post subject:  Re: 00 (x3) BWW
Very nice guitars.


Steve
Author:  sdsollod [ Sat Nov 25, 2023 9:55 pm ]
Post subject:  Re: 00 (x3) BWW
Very nice work Marcus. Very tasteful. pizza That’s a super nice piece of walnut too. How did you do the matte finish?
Author:  bcombs510 [ Sat Nov 25, 2023 9:58 pm ]
Post subject:  Re: 00 (x3) BWW
All lovely, the walnut is my favorite!


Sent from my iPhone using Tapatalk Pro
Author:  Marcus [ Sat Nov 25, 2023 10:07 pm ]
Post subject:  Re: 00 (x3) BWW
sdsollod wrote:
Very nice work Marcus. Very tasteful. pizza That’s a super nice piece of walnut too. How did you do the matte finish?


I built up finish like normal (sealer and gloss finish). After the final gloss coat dried enough, I sanded to about 1500 or 2000 and sprayed 2-3 coats of satin finish. That's it!
Author:  Hesh [ Sat Nov 25, 2023 10:32 pm ]
Post subject:  Re: 00 (x3) BWW
Some real beauties here very nice work Marcus, congratulations!
Author:  Terence Kennedy [ Sun Nov 26, 2023 6:04 pm ]
Post subject:  Re: 00 (x3) BWW
Great miters!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/