| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Wells Karol jig parts http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55775 |
Page 1 of 1 |
| Author: | bcombs510 [ Thu Jul 20, 2023 9:12 pm ] |
| Post subject: | Wells Karol jig parts |
Hi folks, Several years ago I built this:  Following the video from our OLF friend Chris Paulick here - https://youtu.be/9oRqUK-CMIo When I built it I bought mostly enough stuff for two of them. I don’t know why.  The threaded knobs, nuts and all thread are needed to have the full kit.  If anyone wants to make one of these, I’ve got the HDPE all taped and marked and most of the parts to do it. Yours for free if you pay shipping. Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | Brad Goodman [ Thu Jul 20, 2023 9:58 pm ] |
| Post subject: | Re: Wells Karol jig parts |
wow! I would like to have it if no one else has claimed it already |
|
| Author: | bcombs510 [ Thu Jul 20, 2023 10:54 pm ] |
| Post subject: | Re: Wells Karol jig parts |
Brad Goodman wrote: wow! I would like to have it if no one else has claimed it already For sure! PM me your address and it’s yours.  Sent from my iPhone using Tapatalk Pro |
|
| Author: | meddlingfool [ Fri Jul 21, 2023 2:15 am ] |
| Post subject: | Re: Wells Karol jig parts |
I love mine! Way better than using a Drexel in the Syewmac jig… |
|
| Author: | Clay S. [ Fri Jul 21, 2023 9:05 am ] |
| Post subject: | Re: Wells Karol jig parts |
meddlingfool wrote: I love mine! Way better than using a Drexel in the Syewmac jig… Is that one of those new "smart tools" we keep hearing about!  
|
|
| Author: | meddlingfool [ Fri Jul 21, 2023 10:26 am ] |
| Post subject: | Re: Wells Karol jig parts |
Typing before gin is usually more accurate,lol… |
|
| Author: | jfmckenna [ Fri Jul 21, 2023 2:42 pm ] |
| Post subject: | Re: Wells Karol jig parts |
I love mine too, great jig. |
|
| Author: | phavriluk [ Sat Jul 22, 2023 4:27 pm ] |
| Post subject: | Re: Wells Karol jig parts |
I made one of these and dedicated a trim router to it. A more useful bargain ain't to be had! Says me. |
|
| Author: | banjopicks [ Thu Aug 10, 2023 9:36 am ] |
| Post subject: | Re: Wells Karol jig parts |
Missed out on this and I sure could have used it. Oh well, I'm still going to build one before the next rosette. |
|
| Author: | joshnothing [ Thu Aug 10, 2023 5:21 pm ] |
| Post subject: | Re: Wells Karol jig parts |
Trevor Gore has posted in the past about his modification to eliminate backlash from a jig of this general type. I incorporated his ideas into my own jig and with a precision aftermarket collet and bits you have a rig of almost toolroom precision for chump change. I think you can find Trevor’s posts on the ANZLF. Sent from my iPhone using Tapatalk |
|
| Author: | banjopicks [ Thu Aug 10, 2023 5:47 pm ] |
| Post subject: | Re: Wells Karol jig parts |
Cool. What is ANZLF? |
|
| Author: | joshnothing [ Thu Aug 10, 2023 6:05 pm ] |
| Post subject: | Re: Wells Karol jig parts |
Australia and New Zealand Luthiers Forum. http://www.anzlf.com/viewtopic.php?t=8195 Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|