| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Food for thought http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55752 |
Page 1 of 1 |
| Author: | Ken Nagy [ Mon Jul 10, 2023 6:32 pm ] |
| Post subject: | Food for thought |
Especially for Electric builders.The 12 string head stock is nicely done. https://youtu.be/4SzI4okAURg |
|
| Author: | Chris Pile [ Mon Jul 10, 2023 8:23 pm ] |
| Post subject: | Re: Food for thought |
I've seen that headstock concept done before, but I can't recall when or where I saw it. |
|
| Author: | Barry Daniels [ Tue Jul 11, 2023 9:41 am ] |
| Post subject: | Re: Food for thought |
I think his work process order is bad. He should have laminated the body strips before cutting out and sanding the shape. |
|
| Author: | Ken Nagy [ Tue Jul 11, 2023 10:36 am ] |
| Post subject: | Re: Food for thought |
You could: Laminate strips Glue into a block Saw out shape rough Cut strips the other way Laminate those. Glue back together Rout shape with pattern. I don't see any way around cutting the glued up strips at least once. Laminating and gluing trapezoids would be a nightmare. Any thoughts on the scarf joint being a narrow angle in the neck? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|