| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Goodman 000 14 fret Adi , Brazilian and snakewood. http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55751 |
Page 1 of 1 |
| Author: | Brad Goodman [ Mon Jul 10, 2023 9:31 am ] |
| Post subject: | Goodman 000 14 fret Adi , Brazilian and snakewood. |
On this guitar, I used all the best woods I had in my shop. Adirondack red spruce top. Quartersawn Brazilian rosewood back and sides. Snakewood fretboard, head veneers, bridge and binding. Honduran mahogany neck. Nitro finish. Rubner tuners with snakewood buttons. 24.9” scale           Sent from my iPhone using Tapatalk |
|
| Author: | jfmckenna [ Mon Jul 10, 2023 10:22 am ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Another beauty Brad. That Rosewood, that's the good stuff there. |
|
| Author: | bcombs510 [ Mon Jul 10, 2023 10:50 am ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
That’s a beauty, Brad! Love the snakewood! Sent from my iPhone using Tapatalk Pro |
|
| Author: | Hesh [ Mon Jul 10, 2023 1:07 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Wow what a beauty! The snakewood tuner buttons look much like BRW and match beautifully. Bet she sounds incredible. |
|
| Author: | Marcus [ Mon Jul 10, 2023 3:27 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Stunning work, Brad. You should be very proud. |
|
| Author: | J De Rocher [ Mon Jul 10, 2023 4:21 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Beautiful! Along with the snakewood and the Brazilian, I like that top wood a lot. |
|
| Author: | SteveSmith [ Mon Jul 10, 2023 8:08 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Gorgeous Brad. I used snakewood binding on one recently and I found it to be one of the most difficult binding woods I’ve worked with. How was your experience? Steve |
|
| Author: | Brad Goodman [ Mon Jul 10, 2023 8:58 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
SteveSmith wrote: Gorgeous Brad. I used snakewood binding on one recently and I found it to be one of the most difficult binding woods I’ve worked with. How was your experience? Steve I had the opposite experience. I found it easy to bend with the attached w/b/w purfling. I bend by hand on a pipe heated with a propane torch. I thickness it to around .085" |
|
| Author: | SteveSmith [ Mon Jul 10, 2023 9:21 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Maybe it’s like ebony, some bends easy and some doesn’t. I also bend on a pipe and I used about the same thickness. I sure do like the way it looks. Steve |
|
| Author: | Ken Nagy [ Tue Jul 11, 2023 6:44 am ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
I like the snakewood too; and the rest of the guitar as well. I think what Steve says is right. I saw 3 pieces of 1/4" X 3" snakewood at Woodcraft one day. It looked great. But it was all bent, and had checks, and splits. I couldn't even find enough solid for a fingerboard. I was careful with thin rosewood tubes I turned for the decoration on some guitar pegs; after one just disintegrated in my hand. The Rubner tuners look very nice. The shape on the knobs is very different; reminds me of a violin or cello bridge. Being snakewood helps even more to bringing everything together. |
|
| Author: | Brad Goodman [ Tue Jul 11, 2023 8:38 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Ken Nagy wrote: I like the snakewood too; and the rest of the guitar as well. I think what Steve says is right. I saw 3 pieces of 1/4" X 3" snakewood at Woodcraft one day. It looked great. But it was all bent, and had checks, and splits. I couldn't even find enough solid for a fingerboard. I was careful with thin rosewood tubes I turned for the decoration on some guitar pegs; after one just disintegrated in my hand. The Rubner tuners look very nice. The shape on the knobs is very different; reminds me of a violin or cello bridge. Being snakewood helps even more to bringing everything together. This style of knobs are usually used on Classical guitar tuners. Rubner started out making classical tuners,so they adapted them to steel string tuners. |
|
| Author: | banjopicks [ Wed Jul 12, 2023 1:11 pm ] |
| Post subject: | Re: Goodman 000 14 fret Adi , Brazilian and snakewood. |
Awesome work! This is the kind of thing that makes me want to try again. I probably will never reach this level of excellence but I can try. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|