Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Spalted maple top and dye
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55660
Page 1 of 1

Author:  Conor_Searl [ Fri May 05, 2023 12:23 pm ]
Post subject:  Spalted maple top and dye

I'd like to dye this top a burgundy color, but if it's possible I'd like to leave the spalted part a natural color. Is there a way to do this? Could I carefully paint shellac over the spalted parts? Will the black line prevent dye from leaching into the spalted parts?

Author:  Chris Pile [ Fri May 05, 2023 12:53 pm ]
Post subject:  Re: Spalted maple top and dye

The black line is the spalt. It's mildewed wood, essentially.

Author:  meddlingfool [ Fri May 05, 2023 1:01 pm ]
Post subject:  Re: Spalted maple top and dye

I wonder if you could cover it with frisket and then carefully exacto along the spalt lines?

Author:  DennisK [ Fri May 05, 2023 1:06 pm ]
Post subject:  Re: Spalted maple top and dye

Test on scrap.

Author:  doncaparker [ Fri May 05, 2023 1:25 pm ]
Post subject:  Re: Spalted maple top and dye

Tangent: It's a darn shame you will be covering up that section in the middle with a fingerboard extension.

Author:  Conor_Searl [ Fri May 05, 2023 4:20 pm ]
Post subject:  Re: Spalted maple top and dye

DennisK wrote:
Test on scrap.


yeah :| I was just hoping for a shortcut.

Author:  Conor_Searl [ Fri May 05, 2023 4:22 pm ]
Post subject:  Re: Spalted maple top and dye

meddlingfool wrote:
I wonder if you could cover it with frisket and then carefully exacto along the spalt lines?


Good idea. I'll try it on my scrap tests. :D

Author:  Conor_Searl [ Fri May 05, 2023 4:24 pm ]
Post subject:  Re: Spalted maple top and dye

doncaparker wrote:
Tangent: It's a darn shame you will be covering up that section in the middle with a fingerboard extension.


Yeah, it looks cool for sure. But that I have that wood at all was incidental. I wanted a piece of Maple for the top of an experiment, and those pieces were the cheapest maple cap available when I bought the mahogany blank underneath.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/