Mike my friend why do you want to remove the neck, it's not easy and typically is not necessary unless the body/neck joint is failing from an accident?
We love pictures
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Have a Gibson SG Electric in the shop http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55584 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Mar 19, 2023 10:31 pm ] |
| Post subject: | Have a Gibson SG Electric in the shop |
Looking for neck removal technique. Mike |
|
| Author: | Chris Pile [ Mon Mar 20, 2023 12:06 am ] |
| Post subject: | Re: Have a Gibson SG Electric in the shop |
Does it have a neck pickup? |
|
| Author: | Hesh [ Mon Mar 20, 2023 5:07 am ] |
| Post subject: | Re: Have a Gibson SG Electric in the shop |
Mike my friend why do you want to remove the neck, it's not easy and typically is not necessary unless the body/neck joint is failing from an accident? We love pictures
|
|
| Author: | Clay S. [ Mon Mar 20, 2023 8:21 am ] |
| Post subject: | Re: Have a Gibson SG Electric in the shop |
If you are looking for a "non destructive " technique, then as Hesh asked, Why? This video may show you what you are up against: https://www.youtube.com/watch?v=VMmryoBoQWU If you have to do a neck reset, working through the neck pickup pocket, an oscillating tool with an off set blade might be your friend. Personally, that is a can of worms I would lump in with an Ovation reset, and would pass on. ![[uncle]](./images/smilies/surrenderflagqv6.gif "Uncle")
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|