Hey I think you coulda gone for a closer grain match on those splines JUST KIDDING
Awesome job, John.
Sent from my iPhone using Tapatalk
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| major repair of a guild headstock http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55241 |
Page 1 of 1 |
| Author: | bluescreek [ Mon Sep 05, 2022 5:32 pm ] |
| Post subject: | major repair of a guild headstock |
I know you may not be a fan of Splines but there are times you need them This is a 70's guild dred with a bad break that was poorly repaired. This is a professional musician from FLA and wanted it put back structurally so you can see this series first the take apart and stabilizing process The first guy though epoxying in 2 lag screws would fix it, well that didn't work |
|
| Author: | bluescreek [ Mon Sep 05, 2022 5:35 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Once I had a solid platform I can machine in 2 splines to allow me to fix this. They key was to get out of the bad wood so Good wood to good wood and no epoxy residue once the small splines were fixed into the neck and head I can now machine and replace the bad wood |
|
| Author: | bluescreek [ Mon Sep 05, 2022 5:41 pm ] |
| Post subject: | Re: major repair of a guild headstock |
the bad wood lost all structural strength so now get the head stock wood to solid joints and to tie them together the head stock was thinned so I can use a veneer on the top and back to make it strong and stable. As an engineer all the structure had to be fixed so the applied stresses would be handled and joints wouldn't fail. Owner wanted it economic and strong we went with black paint of the upper neck and faded to the original neck the actual labor time was about 4 1/2 hour of time over about a week |
|
| Author: | bluescreek [ Mon Sep 05, 2022 5:42 pm ] |
| Post subject: | Re: major repair of a guild headstock |
front view |
|
| Author: | Chris Pile [ Mon Sep 05, 2022 6:59 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Holy crap. Good job, John. |
|
| Author: | SteveSmith [ Mon Sep 05, 2022 7:11 pm ] |
| Post subject: | Re: major repair of a guild headstock |
That’s great John. Thanks for sharing that, I’ve got an old Japanese Dread in the shop with two deck screws and epoxy,,,, yeah. You’ve given me a good idea on how to repair it. It was given to me so now I can fix it and find it a good home. Steve |
|
| Author: | meddlingfool [ Mon Sep 05, 2022 7:11 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Yikes! |
|
| Author: | dofthesea [ Mon Sep 05, 2022 9:03 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Nice repair John I always enjoy it when you share your knowledge. |
|
| Author: | joshnothing [ Mon Sep 05, 2022 10:02 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Hey I think you coulda gone for a closer grain match on those splines JUST KIDDING Awesome job, John. Sent from my iPhone using Tapatalk |
|
| Author: | Hesh [ Tue Sep 06, 2022 5:31 am ] |
| Post subject: | Re: major repair of a guild headstock |
Nice job John and this is definitely one of those times when splines are a good idea!!! |
|
| Author: | Terence Kennedy [ Tue Sep 06, 2022 2:20 pm ] |
| Post subject: | Re: major repair of a guild headstock |
Sweet! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|