Sorry for another wood ID thread. I got this some time back from a luthier. At the time I thought it was Sapele but now I’m not 100% sure. Thoughts?
Sent from my iPhone using Tapatalk Pro
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Wood ID (sorry :) ) http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55197 |
Page 1 of 1 |
| Author: | bcombs510 [ Mon Aug 15, 2022 4:16 pm ] |
| Post subject: | Wood ID (sorry :) ) |
Sorry for another wood ID thread. I got this some time back from a luthier. At the time I thought it was Sapele but now I’m not 100% sure. Thoughts? Sent from my iPhone using Tapatalk Pro |
|
| Author: | Colin North [ Mon Aug 15, 2022 4:48 pm ] |
| Post subject: | Re: Wood ID (sorry :) ) |
Could be, figure and color is about right, the sapwood also looks to be appropriate color. Does it have a slight cedar-like scent while being worked/sanded? |
|
| Author: | meddlingfool [ Mon Aug 15, 2022 5:41 pm ] |
| Post subject: | Re: Wood ID (sorry :) ) |
That looks a lot more like khaya than sapele to me. |
|
| Author: | DennisK [ Mon Aug 15, 2022 5:43 pm ] |
| Post subject: | Re: Wood ID (sorry :) ) |
Yeah, probably sapele. Measure the density, it's a little heavier than most mahogany-looking woods. |
|
| Author: | James Orr [ Mon Aug 15, 2022 6:12 pm ] |
| Post subject: | Re: Wood ID (sorry :) ) |
meddlingfool wrote: That looks a lot more like khaya than sapele to me. I was thinking khaya, too. |
|
| Author: | Chris Pile [ Mon Aug 15, 2022 6:28 pm ] |
| Post subject: | Re: Wood ID (sorry :) ) |
Luaun. Light, punky, no strength. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|