Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Ivoroid binding with white ABS purfling
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=55149
Page 1 of 1

Author:  jfmckenna [ Fri Jul 22, 2022 5:23 pm ]
Post subject:  Ivoroid binding with white ABS purfling

Will that just look terrible? I like Ivoroid a lot and have never used ABS before but dang is it very white. This guitar will be finished in a dark shellac so I wonder if that would even it out?

Anyone know what Martin does on their D-45's for example? The ones that use Ivoroid, do they use very thin Ivoroid purfling to get that black/white lines? Fiber perhaps?

If so where would I even get something like that?

Cheers

Author:  bluescreek [ Fri Jul 22, 2022 5:39 pm ]
Post subject:  Re: Ivoroid binding with white ABS purfling

nope Martin did that for years

Author:  jfmckenna [ Fri Jul 22, 2022 5:42 pm ]
Post subject:  Re: Ivoroid binding with white ABS purfling

Ok good to know, thanks John.

Author:  Clay S. [ Fri Jul 22, 2022 5:43 pm ]
Post subject:  Re: Ivoroid binding with white ABS purfling

Cabinet shops often carry thin edgebanding in various shades of white which may be a good match to ivoroid bindings. Edgeco also sells rolls which would furnish a lifetime supply:
https://edgecoinc.com/
Typing ivory into the search header brings up 6 different color variations 15/16ths inch wide X .018 inches thick.
A cabinet shop should sell you 10-12 feet for a few bucks (some might even give it away).

Author:  jfmckenna [ Sat Jul 23, 2022 12:48 pm ]
Post subject:  Re: Ivoroid binding with white ABS purfling

That's a good source Clay. I have however gotten lazy in my years and like to buy already cut :)

And actually I have miles of black and white plastic purfs.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/