Good luck with that Brad. Maybe you could take up a new skill and make your own.
https://fraulini.com/2009/02/12-string-tailpiece/
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Looking for a National 12 string Tailpiece… http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54699 |
Page 1 of 1 |
| Author: | Brad Goodman [ Thu Jan 13, 2022 5:48 pm ] |
| Post subject: | Looking for a National 12 string Tailpiece… |
I know this is a longshot but I’m looking for a National 12 string Tailpiece for my Stella type Guitars. They’re the only ones who make it and they’re back ordered for six months. Sent from my iPhone using Tapatalk |
|
| Author: | Darrel Friesen [ Fri Jan 14, 2022 11:25 am ] |
| Post subject: | Re: Looking for a National 12 string Tailpiece… |
Good luck with that Brad. Maybe you could take up a new skill and make your own. https://fraulini.com/2009/02/12-string-tailpiece/
|
|
| Author: | Brad Goodman [ Fri Jan 14, 2022 12:10 pm ] |
| Post subject: | Re: Looking for a National 12 string Tailpiece… |
Darrel Friesen wrote: Good luck with that Brad. Maybe you could take up a new skill and make your own. https://fraulini.com/2009/02/12-string-tailpiece/I know some people make their own and I am skilled enough in metal work to do it, but I would would rather do other things. It's the same way I feel about making purfling and kerfed linings-LOL |
|
| Author: | Freeman [ Fri Jan 14, 2022 12:15 pm ] |
| Post subject: | Re: Looking for a National 12 string Tailpiece… |
Darrel Friesen wrote: Good luck with that Brad. Maybe you could take up a new skill and make your own. https://fraulini.com/2009/02/12-string-tailpiece/When I built my Stella clone a few years ago I talked to Todd about how he made his, but I ended up buying one from NRP. The latest issue of Fretboard Journal has an article about Jack Tarlinton (Wandering Boy Guitars) and how he makes his. |
|
| Author: | Brad Goodman [ Fri Jan 14, 2022 12:46 pm ] |
| Post subject: | Re: Looking for a National 12 string Tailpiece… |
Freeman wrote: Darrel Friesen wrote: Good luck with that Brad. Maybe you could take up a new skill and make your own. https://fraulini.com/2009/02/12-string-tailpiece/When I built my Stella clone a few years ago I talked to Todd about how he made his, but I ended up buying one from NRP. The latest issue of Fretboard Journal has an article about Jack Tarlinton (Wandering Boy Guitars) and how he makes his. Yes, I am familiar with both these guys and how they make them,but I am in such a groove with my building that I just don't what to go down that rabbit hole..... I actually have an antique one, but I I don't want to use it on a spec guitar. Next time I have an opportunity to buy them I am going to get several so I don't run into this problem again. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|