| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Creating G-code from Sketchup 17 http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54598 |
Page 1 of 1 |
| Author: | banjopicks [ Tue Dec 07, 2021 11:45 am ] |
| Post subject: | Creating G-code from Sketchup 17 |
I don't yet own a CNC but I was curious if I could make something and I did. I know it will need some tweaks but I can't do that until I get a machine. Don't really know when but It's on my toy list. Anyway here's what I got using the Phatboy plugin. I'm excited that it was so easy. It's basically a 15" radius dish. Attachment: Capture.JPG The code, at least part of it. % (A 3D Contour : Generated by SketchUcam V1.5a-241a161) (Bit Diameter: 1") (StepOver: ~ 11/16" 70.0%) (Spindle speed: 15000) (FeedRate: 100") (Material Thickness: 3/4") (Safe Length: 30") (Safe Width: 30") (Multipass: true) (Multipass Depth: 1/16") (SafeHeight: 1/8") (NOTE: Z zero is top of material) G90 G20 G49 M3 S15000 (Pass 1 curz -0.0625) G0 Z0.1250 X1.4092 Y2.0920 G1 F100 X1.4092 Y2.0920 Z-0.0625 X1.4092 Y25.3920 Z-0.0625 X2.1092 Y25.3920 Z-0.0625 X2.1092 Y17.2006 Z-0.0625 X2.1092 Y17.2006 Z-0.0049 X2.1092 Y16.9920 Z-0.0049 X2.1092 Y16.2920 Z-0.0195 X2.1092 Y13.4920 Z-0.0421 X2.1092 Y12.7920 Z-0.0380 X2.1092 Y10.6920 Z-0.0211 X2.1092 Y9.9920 Z-0.0097 X2.1092 Y9.5833 Z-0.0097 X2.1092 Y9.5833 Z-0.0625 X2.1092 Y1.3920 Z-0.0625 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|