| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Which of these three wood fillers would you recommend? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54522 |
Page 1 of 1 |
| Author: | qualendi [ Fri Nov 05, 2021 10:24 am ] |
| Post subject: | Which of these three wood fillers would you recommend? |
I'm very close to finishing my build and I'm having trouble choosing a filler that would fill in the grains of my lumber. If you have any experience with these products do let me know. |
|
| Author: | jfmckenna [ Fri Nov 05, 2021 11:02 am ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
I think what you want is a pore filler, none of those are pore fillers. A pore filler is something like this: https://www.lmii.com/73-pore-fillers |
|
| Author: | johnparchem [ Fri Nov 05, 2021 1:46 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
I agree none of the ones shown are pore fillers. In any case You need to go clear or much darker than the wood you are using or you will hide the grain . |
|
| Author: | Freeman [ Fri Nov 05, 2021 2:04 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
What are your woods? How do you plan to finish them? Do you have cutoffs to experiment on? |
|
| Author: | Ernie Kleinman [ Sun Nov 07, 2021 6:03 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
These are some types of wood /pore fillers, oil. water based ,and shellac/ pumice or rottenstone, And there are also more newer ones such as epoxy. or z poxy . Todd stock has a youtube video on pore filling a guitar with epoxy. And there are other methods as well. Pore filling invlves IMHO a learning curve. I started using the oil based product with silica behlens back in the early 80/s and it took time to learn to fill mahogany pores. Good luck ! |
|
| Author: | bluescreek [ Mon Nov 08, 2021 5:35 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
none of them I use aqua coat Martin uses a very dark filler and hasn't hidden the grain yet ,since the purpose of the filler is to fill pores not cover the grain My friend Wayne Henderson uses this filler https://www.amazon.com/Elmers-Products- ... 191&psc=1' he colors it very dark to show the pores he likes that look |
|
| Author: | jfmckenna [ Mon Nov 08, 2021 7:51 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
John, isn't that Elmers product the same as what the OP is posting? Those products are for when you have errors in your wood work and you can just fill them in an attempt to hide them and in my experience it never looks good. May as well use saw dust and glue. I like aquacoat very much now too and you can dye that as well. |
|
| Author: | bluescreek [ Tue Nov 09, 2021 6:34 am ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
that is the pro bond Wayne uses the regular elmers I don't use that one I also know people using drywall joint compound |
|
| Author: | Chris Pile [ Tue Nov 09, 2021 9:52 am ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
Quote: none of them I'm with John. Wood filler is for filling nail holes. Leave it for the cabinet makers. |
|
| Author: | Bryan Bear [ Tue Nov 09, 2021 1:51 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
I think pro-bond is Elmers branding for their products when sold at Home Depot. |
|
| Author: | AndyB [ Tue Nov 09, 2021 2:29 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
Finish resin epoxy will work, like what is used to do fiberglass layups. Squeegee on a few coats and sand back to level. |
|
| Author: | bluescreek [ Tue Nov 09, 2021 8:51 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
filling is part of finish prep so understanding that is part of the solution I tried about every filler out there. I do find the aqua coat as easy process as I have found yet The epoxies can leave foot prints under the finish is not done correctly Aqua coat is simple and you can get a great level and it is easy to color if you want to color it seal fill seal top coat |
|
| Author: | Lukehofer588 [ Tue Nov 09, 2021 9:00 pm ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
Aqua coat is waterbased can you use that the under nitro? Sent from my iPhone using Tapatalk |
|
| Author: | CarlD [ Wed Nov 10, 2021 12:21 am ] |
| Post subject: | Re: Which of these three wood fillers would you recommend? |
Yes. A layer of shellac goes under and over each coat. Check the directions. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|